16 bit DDS Generator up to 200 MHz
- Fast 16 bit DAC with FPGA-based DDS
- Two, four or eight channels with 625 MS/s DAC output rate
- DDS frequency DC to 200 MHz
- Up to 50 DDS cores on one channel
- Native DDS-commands: Frequency, Amplitude, Phase, Frequency Slope, Amplitude Slope, Wait for trigger, Digital outputs
- DDS commands can be issued with 6.4 ns spacing
- Output level ±80 mV to ±2.5 V into 50 Ohm (±160 mV to ±5 V into high-impedance loads)
- Fixed trigger to output delay
- GBit Ethernet interface
- Huge on-board memory for 512 Million DDS Commands per 4 channels
DN2.96x
The DN2.96x series of Ethernet DDS generators deliver the highest performance in both speed and resolution. The series includes portable Ethernet units with either two, four or eight synchronous channels. DDS – Direct Digital Synthesis – is a method for generating sine waves from a single, fixed-frequency reference clock and is widely used in signal generation applications. The DDS functionality implemented on Spectrum Instrumentation’s AWG platform is based on the principle of adding multiple “DDS cores” to generate a multi-carrier (multi-tone) signal, with each carrier having its own well?defined frequency, amplitude and phase. In addition to these static parameters, there are also build in dynamic parameters like frequency slope and amplitude slope to allow for intrinsic linear changes for multiple cores.The series includes LXI units with either two, four or eight synchronous channels. The large onboard memory can be segmented to replay different waveform sequences.
| Product | Platform | Analog-Out | Digital-Out | Resolution | Samplerate | Bandwidth | Memory (Max) | Synchronization | Max Output Level | Feature | Options | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product | Platform | Analog-Out | Digital-Out | Resolution | Samplerate | Bandwidth | Memory (Max) | Synchronization | Max Output Level | Feature | Options |