Revision 5.3 build 1990 release date 28th April 2008

	Quartz 2 for M2i cards programmable now
	Added MinHold and MaxHold for analog signals

Revision 5.3 build 1963 release date 9th April 2008

	Pattern trigger of 70xx series now allows to combine multiple edges with OR
	All M2i cards now allow programming of pre-trigger area in FIFO mode
	All 47xx cards now allow to program also trigger sources from module B
	Bug-Fix MX.47xx: PXI reference clock mode was not written correctly

Revision 5.3 build 1898 release date 27th February 2008

	Automatic calculation of FIFO block size reworked and optimized
	Bug-Fix: Global start/stop buttons display was not actualized when doing fast FIFO mode
	Bug-Fix: Available clock dividers at M2i.72xx series not correct

Revision 5.3 build 1871 release date 27th January 2008

	Clock Divider values extended for M2i card series
	M2i.70xx series: trigger modes that are not available are no longer shown under SBench
	Support of new Diff-Option for M2i.30xx series
	Support of M2i.60xx series hardware version V7

Revision 5.3 build 1825 release date 16th November 2007

	Support of new hardware MC.47xx and MX.47xx
	Bug-Fix: memory leak if setup was loaded

Revision 5.3 build 1743 release date 1st August 2007

	Support of new hardware MX.6010
	Support of new M2i-Express cards

Revision 5.3 build 1679 release date 21st June 2007

	Bug-Fix: Demo boards
	Number of signals to be saved and loaded in sbs-file increased to 64
	M2i trigger delay now allows to program complete 64k range
	Support of M2i/MI/MC/MX.60xx new hardware version V5
	Bug-Fix: when using mixed MI and M2i cards it depended on the card ordering whether all M2i features have been available
	Support of M2i/MI/MC/MX.31xx new enhanced offset correction calibration
	Bug-Fix: 60xx and amplifier card: gain was changed when changing filter setup
	Bug-Fix: when loading sbs-files the signals are now named correctly as stored and not just named by index

Revision 5.3 build 1575 release date 12th April 2007

	Bug-Fix: M2i.203x series allowed wrong settings for memory and posttrigger
	New ASCII export data format to improve export of FFT data
	Bug-Fix: configuration load sometimes crashes with a memory leak
	Default colors changed to support 16 channel cards

Revision 5.3 build 1391 release date 12th December 2006

Support of M2i.47xx series hardware revision V2

Revision 5.3 build 1351 release date 1st December 2006

	Trigger level range adjusted for M2i.46xx and M2i.47xx series
	Full support for M2i.47xx including calibration added

Revision 5.3 build 1317 release date 16th November 2006

	Bug-Fix: memory leaks when closing SBench with running calculation threads
	Calibration for M2i.47xx series added

Revision 5.3 build 1280 release date 30th October 2006

	Bug-Fixes: M2i limits for pre/post in gate and multi mode sometime wrong
	M2i Sync support added

Revision 5.3 build 1221 release date 6th October 2006

	Some small Bug-Fixes for M2i card series
	Support of M2i.60xx together with Amplifer card

Revision 5.3 build 1201 release date 22nd September 2006

	Support of M2i.72xx series added
	SB4 import of signals with >2 GS/s possible
	Comments allowed in ASCII files
	Bit modes for M2i.72xx added

Revision 5.3 build 1179 release date 5th September 2006

	Support of M2i.60xx and M2i.61xx added
	Force trigger for all modes available for M2i card series

Revision 5.3 build 1064 release date 10th July 2006

	Support of M2i.70xx and M2i.46xx added
	Display of detailed M2i driver error messages added

Revision 5.3a build 960 release date 26th April 2006

Support of new M2i driver interface

Revision 5.3 build 934 release date 18th April 2006

	Support of full range of M2i cards included
	Bug-Fix: streaming file of 70xx series had wrong format, can't be read back
	Added ENOB(SNR) for calculation of dynamic parameters
	Bug-Fix: Setup of average was sometimes lost when changing dialog pages
	Zoom-X buttons added as default for analog display

Revision 5.3 build 782 release date 11th February 2006

	Support of new M2i series including some of the new features
	Missing bitmaps in english trigger dialog
	Problem when using star-hub together with MI.72xx cards, missing output
	Some driver errors have been ignored by SBench

Revision 5.2.22 build 681 release date 20th december 2005

	Versioning changed to include internal build number
	New feature: option -FASTMEM allows extra fast autosave mode
	Number of supported cards at the same time increased to 64
	Bug-Fix: PXI trigger setup still uses PXI trigger after disabling the setup
	Bug-Fix: FIFO mode at 8 bit acquistion cards: the resulting SBS file has wrong header settings

Revision 5.2.22 release date 10th october 2005

	New feature: waveform amplifier module supported
	New feature: multiplexed data export, multiple signals in one file
	Bug-Fix: Demo mode for MI.40xx series now shows all input ranges

Revision 5.2.21 release date 25th may 2005

	Bug-Fix: Some wrong settings on the 72xx series haven't been checked
	Bug-Fix: 70xx series: FIFO mode was by fault restricted to 16 bit
	Improvement: ASCII import now allows more than 10M samples
	Bug-Fix: Trigger termination on 60xx and 61xx series wasn't set in hardware

Revision 5.2.20 release date 6th october 2004

	Improvement: FIFO files > 4 GB can be written on NTFS file systems
	Improvement: HW Info from menu also shows hardware features of cards
	New HW: Support of 45xx series revision x.2: Enhanced 12 bit trigger level
	New HW: Support of MX series revision 12.x: PXI features
	Bug-Fix: 70xx and 72xx series: trigger output was available on wrong trigger modes

Revision 5.2.19 release date 30th august 2004

	New HW: 40xx series revision x.2: enhanced 10 bit trigger level supported
	New HW: Support of MI.72xx, MC.72xx and MX.72xx series
	Bug-Fix: Generator-module crashes when using RunRepat button