 | New Features
|
| [SB-2015] Implementation of MC/MX.49xx.
|
| Improvements
|
| [SB-1721] Do not change visible Y area when moving preview rect
|
| [SB-1788] X-Y Display: Exchange X and Y signal by drag and drop
|
| [SB-1932] Change pulsewidth default scale from samples to time and remember setting when closing dialog
|
| [SB-1965] ASCII Export: number of printed digits programmable in user settings
|
| [SB-1968] Improvements in Print-Preview dialog.
|
| [SB-1988] Cursor Info in FFT: Difference between Cursor B and A in dB (not dBc, dBFS, ...)
|
| [SB-1991] Show old rect during move in preview display
|
| [SB-2002] Remember last directory for setup load
|
| [SB-2016] Calibration progress output also for MICX cards
|
| [SB-2038] Use FLUSH command for timestamps
|
| [SB-2050] Allow load/save of FIR coefficients from/to file
|
| [SB-2057] Improved sample rate calculation for synchronized cards
|
| [SB-2084] Add "Remember and don't ask again" checkbox to error message on calculation creation in non-existent directory
|
| [SB-2108] Remember last used setup file directory and store it in user settings
|
| Fixed bugs
|
| [SB-972] Adding two channels with different units to a display window creates weird results
|
| [SB-1765] Max quartz clock too high for MICX.46xx
|
| [SB-1836] Maximum acquisition time not updated when changing destination directory via tool bar
|
| [SB-1854] Wrong signal painting in analog display corrected.
|
| [SB-1863] Wrong xy-display values/painting corrected.
|
| [SB-1890] Cursor values in screenshot not readable when using black/white option
|
| [SB-1917] Openening a 31xx setup with 49xx card disables differential capability
|
| [SB-1918] Display not properly cleared when using history mode and zoom
|
| [SB-1919] occasionally crashes deleting a FFT calculation in loop mode
|
| [SB-1921] Possible Crash after loading setup
|
| [SB-1924] Closing external trigger dialog with OK does not always change trigger source properly
|
| [SB-1925] Opening setup of 8 channel card with 4 channel version creates error and prevents card start
|
| [SB-1935] Cards with individual channel pulsewidth counters have wrong minimum PW value in dialog
|
| [SB-1939] Using deactivated extra digital inputs in a conversion function deadlocks SBench
|
| [SB-1944] Disabled analog channels do not disable the corresponding digital channels
|
| [SB-1945] Size of printouts are not properly scaled to selected page
|
| [SB-1947] Changing Pixels for screenshot has no effect and values are wrong
|
| [SB-1949] Changing digitalmode via channel dialog from 4 bit to 2 bit removes all digital channels from display
|
| [SB-1950] Changing digital mode by activating/deaktivating digital channels does not update "Digital Bits" column in input channel dialog
|
| [SB-1953] No unit shown in Set visible area dialog when having a value of 0 for a border
|
| [SB-1969] ASCII import: signal right scaled and without anomalies
|
| [SB-1974] User Offset not properly checking for min/max boundaries when using mouse wheel
|
| [SB-1975] Changing user offset from "Setup AI channels" dialog does not work when updating multiple channels
|
| [SB-1976] Moving scrollbar does not update synced displays
|
| [SB-1977] Locked cursor with tracking enabled and moving cursor A: cursor B follows signal too
|
| [SB-1981] No more program crash with empty FIR filter coefficients.
|
| [SB-1986] No more program crash at replay start with only the second ch enabled on M2i.6033.
|
| [SB-1987] "Zoom to full segment" on Multiple Recording data (without timestamps) paint no samples from the neighbor segments.
|
| [SB-1990] Other single-starts after a stopped recording and a display-zoom operation are now possible.
|
| [SB-1993] Harmonics cursors do not respect black/white in screenshot
|
| [SB-1994] Strange message when starting with no card and no demo card installed
|
| [SB-1996] Loading setup does not restore pre and post for FIFO-GATE
|
| [SB-1997] Possible to set invalid clock divider values
|
| [SB-1998] Disabling first channel in Easy Generator causes crash
|
| [SB-1999] Crash in function generator when running before start with channel selected
|
| [SB-2000] Vertical zero line painted over X scale
|
| [SB-2003] Painting of bus is wrong in screenshot of digital display
|
| [SB-2004] ABA is wrong when interlacing is active
|
| [SB-2007] Grid always shown in print preview
|
| [SB-2010] Possible to change calculation settings during average run
|
| [SB-2019] External pulsewidth trigger mode not correctly restored from config file
|
| [SB-2020] FIFO_GATE may show incorrect or no data
|
| [SB-2021] Column "Digital Bits" does not always show correct state
|
| [SB-2022] Not all columns are centered
|
| [SB-2023] Enabled digital channels are not added to display
|
| [SB-2024] Channel order is messed up when channels are enabled using "Digital Bits" column
|
| [SB-2025] Fast click-and-delete in channel list can cause crash
|
| [SB-2026] Wrong unit in channel trigger setup dialog
|
| [SB-2027] Entry for digital bits in ABA channel is wrong
|
| [SB-2028] Right-clicking slow A channel causes crash
|
| [SB-2029] No digital channels for MX.49xx
|
| [SB-2030] Channel from SB5 import are always segmented
|
| [SB-2032] Prg crash at MX49 Fifo-Mode configuration removed.
|
| [SB-2034] Cursor in preview display in ABA mode totally unrelated to analog display
|
| [SB-2036] Cannot access function generator setup after running maximum calculation on it
|
| [SB-2039] Sync group moves depending on card opening order
|
| [SB-2041] Painting signal always to the left border.
|
| [SB-2042] Removing termination check box at PXI-Reference clock-mode.
|
| [SB-2044] FIR: Manually entering more coefficients than currently set causes crash
|
| [SB-2045] User file with settings and layout are now used at program start.
|
| [SB-2046] Trigger setup for digital card may be inconsistent
|
| [SB-2048] Clockmode: PXIref are now disabled if the mode is changed to PLL.
|
| [SB-2051] User information about not implemented Replay mode with signals from different files.
|
| [SB-2055] MICX: Change of clock mode now in all directions complete written to the driver.
|
| [SB-2060] MICX 46/47/49: Not implemented channel steepness trigger mode was settable.
|
| [SB-2061] M2i.49xx digital inputs not available in input dialog
|
| [SB-2064] Clock output not available in PXI RefClock mode
|
| [SB-2065] Segment display with timestamps: scrollbar left not working
|
| [SB-2066] Still one grid line visible when disabling grid display
|
| [SB-2067] No analog data visible when using a longer trigger delay than Memsize
|
| [SB-2068] Trigger delay not restored from setup
|
| [SB-2069] Help and Manual not available when starting SB6 by setup file.
|
| [SB-2072] Export dialog on top card node contains also inactive channels and lead to error
|
| [SB-2073] Using "add to display" context menu brings last display tab in focus after adding
|
| [SB-2074] Color settings for imported channels are not stored in setup file
|
| [SB-2075] Openening a setup including imported channels twice creates "file already open" message for every channel and disables imports
|
| [SB-2076] Color change of imported channel does not mark setup as changed
|
| [SB-2077] Memsize change in Function-Generator calculations correct interpreted.
|
| [SB-2080] Opening a setup with calculations on non-existing channels creates useless dialog asking for channel reduction
|
| [SB-2081] Opening setup of 8 channel card with 4 channel version creates weird channels
|
| [SB-2082] Setup Store/Load not working with multiple FFTs
|
| [SB-2085] Mouse wheel does not work on 72xx Output columns
|
| [SB-2086] Closing function generator does not update signal in analog display
|
| [SB-2087] Std-Single Replay in loop mode: channel deactivation now possible
|
| [SB-2088] Analog Replay boards: signal to channel assignment are now stored in config file
|
| [SB-2089] ASCII import are now without signal spikes.
|
| [SB-2091] 4 ch replay boards: Alignment of imported signals are now correct.
|
| [SB-2092] Importing ASCII file with 8bit resolution causes crash when channel is displayed
|
| [SB-2095] Deleting A2D conversion before first acquisition causes crash
|
| [SB-2096] Cannot start with 70xx and 60xx
|
| [SB-2097] Channel names are mixed up when importing data from synced cards with 70xx as first card
|
| [SB-2098] Sync setup error when starting with spcm0 and spcm2
|
| [SB-2102] Pressing "Del" twice on calculation in Info dialog causes crash
|
| [SB-2103] Depending on the card order a mode setup error might occur with synced 60xx and 70xx
|
| [SB-2104] Possible crash when replaying data on 70xx/60xx sync group
|
| [SB-2105] "Block not found" error in Analog Display with synced 4932 and 7010
|
| [SB-2106] Acquisition of synced cards hangs with more than 256kS
|
| [SB-2107] Working directory not stored in user settings
|
| [SB-2110] Filter dialog changes structure when displaying FIR error message
|
| [SB-2112] Button focus in setup channel dialog is on "edit description" instead of OK
|
| [SB-2114] Can not start with two synced M3i
|
| [SB-2124] Cannot setup cards using "Analog Inputs" node when calculated channels exist
|
| [SB-2125] Middle click on channel entry disables channel but doesn't remove it from display |
| New Features
|
| [SB-77] X-Y Display
|
| [SB-220] Show analog signals into digital display and digital signals into analog display
|
| [SB-1683] Implementation of M2i.49xx
|
| [SB-1623] Rework mode and memory setup
|
| [SB-1660] Change default values for Pre and Post Gate to minimum
|
| [SB-1661] Use "continuous" acquisition as default for all FIFO modes and avoid abbreviation in Multi/ABA
|
| [SB-143] Additional acquisition/measurement description stored in signal
|
| [SB-896] Comments for digital channels
|
| [SB-1506] Support for large data
|
| [SB-1528] Mark first channel as channel for X axis in channel area
|
| [SB-1649] Adjust setup of synced cards
|
| Improvements
|
| [SB-191] Use card's serial number in file name for synced acquisition to pure binary file
|
| [SB-1470] Function Generator: calculated signal is always centered around trigger line (0 sec)
|
| [SB-1550] Allow display of channels from different files
|
| [SB-1551] Do not show FIFO speed warning if no channels in displays
|
| [SB-1554] Improve ASCII import dialog and flexibility
|
| [SB-1564] New Menu Command: Windows -> Show -> Show all
|
| [SB-1567] Show "Ignore Sync" at start dialog only if Sync feature is available
|
| [SB-1571] Store SBench version information also as comments in Config file
|
| [SB-1574] Changing source channel of measurements
|
| [SB-1580] Allow usage of inverted inputs for digital calculations
|
| [SB-1585] Display selection dialog to allow import of BIN and WAV files without existing header file
|
| [SB-1587] Allow signal comments also for digital signals
|
| [SB-1591] Set keyboard focus to name field in channel setup dialog
|
| [SB-1595] Allow save of setup files also if no hardware is present
|
| [SB-1598] Add missing zoom functions to list in shortcut dialog and correct spelling
|
| [SB-1606] Allow page orientation choice also for created PDF screen shots
|
| [SB-1621] Support for spike trigger mode (SPC_TM_SPIKE)
|
| [SB-1625] Limit channel name length in channel setup dialog to maximum value.
|
| [SB-1626] Board with starhub and missing sync-cable: SB6 starts now (unsynced) after a warning hint.
|
| [SB-1634] Improve field names and inter-field interaction in "Input Mode" dialog
|
| [SB-1644] Visualize enabled 50 Ohm termination in HF path of M3i.21xx cards in "Setup AI-channel" dialog
|
| [SB-1646] Termination for EXT1 does work now
|
| [SB-1687] Notify size in FIFO mode now depends on data rate
|
| [SB-1705] Allow only valid ASCII data formats for export of digital channels
|
| [SB-1713] Improve Split File Settings to allow smaller values down to 1 x notifysize of driver
|
| [SB-1722] Opacity decrement for "Popup channel name" depends now on fading time
|
| [SB-1730] Use black background for Y scale tooltip in analog display
|
| [SB-1752] Stretch should be equal in ZoomTo dialog
|
| [SB-1757] Show offset in channel info dialog
|
| [SB-1763] Formula and Memsize handling improved.
|
| [SB-1771] Import of files improved
|
| [SB-1783] Add some icons for standard functions
|
| [SB-1785] No signal pre selection if function generator is issued from the main menu
|
| [SB-1786] Function Generator: Operators + Function list from drop-down box
|
| [SB-1787] Double Click on Function issues the function settings dialog
|
| [SB-1799] Add icon for shortcut setup entry in menu
|
| [SB-1817] Axis legend background color changed to improve visibility
|
| [SB-1823] Clarify which digital channel is LSB/MSB when converting digital data to analog
|
| [SB-1842] Check for existance of destination path
|
| [SB-1870] Function Generator: better values at division through zero choosen
|
| [SB-1899] User defined line thickness in displays
|
| Fixed bugs
|
| [SB-43] No help available for sinus info calculation
|
| [SB-335] SB6 crashes by changing the Trigger-Mode from Software to Single
|
| [SB-1024] SB6 start with synced 31xx and 60xx boards not possible
|
| [SB-1395] ASCII file import with two channels: import of second ch depends on sign of first two sample
|
| [SB-1415] Cursor is not shown when jumping to previous bus value
|
| [SB-1459] Correction of wrong memsize, pre and post size combination.
|
| [SB-1507] X axis is wrong if pre != post
|
| [SB-1509] Custom units not displayed correctly
|
| [SB-1523] Cursors are wrong if display width < display height
|
| [SB-1524] Starting acquisiton with active XY display shows analog toolbar
|
| [SB-1525] Tooltips for XY toolbar are missing
|
| [SB-1526] History mode does not work
|
| [SB-1529] Behaviour after removing channel(s) is wrong
|
| [SB-1531] No signal painted after removing and re-adding all channels
|
| [SB-1532] Behaviour with Y custom units not correct
|
| [SB-1522] Difference between displayed cursor value (with custom units) and exported ASCII value corrected.
|
| [SB-1541] Comments not shown if Y channel in display
|
| [SB-1543] Current view and cursor based calculations should only allow cursors from valid source signal based windows
|
| [SB-1546] Simple and cycle calculations not working when using attached config file
|
| [SB-1547] Copy signal as reference does not work properly with custom units
|
| [SB-1548] Using two synced democards with one completely disabled prevents looped-recordings
|
| [SB-1549] Exporting/importing signals with custom units in all file formats not working properly
|
| [SB-1552] Exporting channels with different length as SB5 crashes
|
| [SB-1553] Imported ASCII data from 46xx/47xx has wrong amplitude
|
| [SB-1555] ASCII import does not show all channels if tab is column divider
|
| [SB-1556] Max level is wrong if ASCII file contains voltage values
|
| [SB-1557] Format of header file depends on current locale
|
| [SB-1558] Color of channel is wrong in channel dialog after Easy Generator
|
| [SB-1559] Easy Generator allows too high signal frequencies
|
| [SB-1560] Invalid data pointer in analog display
|
| [SB-1561] M3i FiFo-MR with smallest segment sizes: after a few records no reaction at next start.
|
| [SB-1562] Sbench hangs when using MULTI with TS
|
| [SB-1563] Signal comment on wrong position inside print preview
|
| [SB-1568] Deleting averaged FFT channel may cause crash
|
| [SB-1569] Channel label's cursor lock state inconsistent
|
| [SB-1570] Export to binary of digital channels only works from cache
|
| [SB-1572] Loading a setup for digital card does not restore Level column in trigger dialog
|
| [SB-1573] Increasing PRE can cause invalid values
|
| [SB-1575] Mark High Level signals not highlighting properly when signal ends/stays HIGH
|
| [SB-1576] Channel Dialog on imported digital channels not available
|
| [SB-1577] Loading Setup with imported digital channels restores previously deleted channels
|
| [SB-1578] Opening settings of digital calculation shows wrong calculation
|
| [SB-1579] Loading attached setup crashes SBench when confirming the two error messages
|
| [SB-1581] Cursor locked on digital channel in display with sync-group move position when changing zoom level
|
| [SB-1582] In digital display right-clicking time axis does not show "Visible area" dialog
|
| [SB-1583] Import of recent files with upper case suffix does not work
|
| [SB-1584] Some tool tips in Easy Generator dialog are wrong
|
| [SB-1586] Wrong symbols in concatenate dialog
|
| [SB-1588] Loading setup with digital bus can cause crash
|
| [SB-1590] Nearly deadlock when disabling group of digital channels
|
| [SB-1593] Zoom full fit in digital display sometimes only shows partial data
|
| [SB-1594] Display of imported digital channels in SB6 format deadlocks SBench
|
| [SB-1596] Digital calculation can overwrite existing channel in display
|
| [SB-1600] Crash when dragging imported channel into display whilst display is loading another channel
|
| [SB-1601] Using "Define Zoom Area" in digital display takes positions outside the display into account
|
| [SB-1602] Various bugs in printer/screen shot dialog
|
| [SB-1607] Grid is wrong in digital display printout
|
| [SB-1609] Zoom level nor properly restored from setup file
|
| [SB-1610] Occasional crashes running multiple FFT calculations in loop
|
| [SB-1611] Changing PRE in standard mode should always adjust POST
|
| [SB-1612] Cycle Info calculation is not restored from config file
|
| [SB-1614] Left-most sample in analog display is wrong
|
| [SB-1615] Synced cursors are wrong if custom units exist
|
| [SB-1616] Dragging channel into digital display while update is running breaks display
|
| [SB-1618] Changing active channel count changes memory settings in Multiple Recording
|
| [SB-1620] Gate with timestamp with oversampling creates totally weird sample x-axis positions
|
| [SB-1622] Opening a setup with invalid channel activation creates calculation channels
|
| [SB-1624] Exporting more than 16 analog channels causes crash
|
| [SB-1628] Preview not showing proper signal shape having comparably small memsizes
|
| [SB-1629] INWIN and OUTWIN trigger modes missing from setup dialogs
|
| [SB-1645] Restore from setup file does not correctly handle hidden channel dialog columns
|
| [SB-1648] Selecting "Show all" from "Windows -> show" menu crashes application
|
| [SB-1654] Old Mi output card as first unused board crashes program at recording-start of chosen second M2i recording board.
|
| [SB-1664] Later add FFT calculation to "loop" not possible from FFT settings dialog
|
| [SB-1665] X-Zoom level can change behavior of segment boarder drawing with synced cards
|
| [SB-1669] Data export on inactive channels creates file errors
|
| [SB-1671] "Enabled" state of Internal settings is wrong after loading setup
|
| [SB-1673] Setup with averaged FFT creates error after loading and cannot be executed
|
| [SB-1675] Dynamic parameter calculation on averaged FFT channels creates error and crashes when being deleted
|
| [SB-1676] No calculations with results targeting "Info dialog" possible on renamed channels
|
| [SB-1677] Info dialog not updated immediately after changing channel name
|
| [SB-1679] multiple recording closed sbench
|
| [SB-1681] Function generator correction: real input signals calculates wrong output levels.
|
| [SB-1688] "Change color" available on "Time domain" node
|
| [SB-1690] Starting Digital Calculation with less than two preselected channels causes crash at channel selection
|
| [SB-1694] Changing segment size causes error
|
| [SB-1696] Cursor one edge off after jump to previous bus value
|
| [SB-1697] Limit FIFO acquisition length doesn't work properly
|
| [SB-1698] FIFO multi: store setup and load setup changes Pre/Post settings
|
| [SB-1699] Crash on FIFO mode MR after some MSamples
|
| [SB-1706] ASCII import of digital channels crashes immediately
|
| [SB-1707] ASCII import drops last sample
|
| [SB-1709] Starting SB6 when the one only available card is locked crashes SBench
|
| [SB-1712] Unsupported channel enable masks are treated inconsistently for DI/DO cards
|
| [SB-1714] After exporting 16 channels the order is mixed up
|
| [SB-1716] Colors of ABA channels not stored in config file
|
| [SB-1717] Preview data calculation for split files can show file error
|
| [SB-1718] Preview data is zero for SBench6 format split files
|
| [SB-1724] Position of first ABA acquisition after MULTI is wrong
|
| [SB-1725] Cursor info not updated when locking to signal
|
| [SB-1726] Show full Y signal can cause crash
|
| [SB-1729] 1:1 button for custom units does not work in dialog for copied channel
|
| [SB-1731] Channel info dialog not available for imported digital channels
|
| [SB-1732] Adding disabled digital channels to export list causes crash
|
| [SB-1733] Adding two segmented channels creates non-segmented result
|
| [SB-1735] X scrollbar not shown when zooming in digital display which shows only converted AI channel
|
| [SB-1739] Creating a screenshot of an empty digital display causes crash
|
| [SB-1741] Last channel name missing in screenshot of digital display
|
| [SB-1748] Signal concatenation does not work correctly for channels with different lengths
|
| [SB-1750] Scrolling to position where no bus is visible causes crash
|
| [SB-1751] Crash in A2D conversion when using non-standard block size
|
| [SB-1754] D2A conversion with more than 16 channels creates wrong result
|
| [SB-1755] Function generator creates spiky signal
|
| [SB-1760] Crash when dragging digital channel or bus into channel list in display in loop mode
|
| [SB-1761] Importing SB5 file with MULTI channels does not create segmented channel
|
| [SB-1762] Crash at SB6 start with config file with formula (that use a recorded signal) included.
|
| [SB-1764] Negative values not parsed correctly in function generator
|
| [SB-1770] Combine Digital Channels to Bus -> selected color is not shown in dialog but gray only.
|
| [SB-1775] Autostore option missing from average setup dialog
|
| [SB-1777] Function Generator shows invalid signals as source when called from menu
|
| [SB-1778] "Jump to segment" buttons are active when segment history is enabled
|
| [SB-1779] Scrolling by arrow keys if segment history is enabled can cause crash
|
| [SB-1781] "Any edge" step size influences "jump to bus value"
|
| [SB-1784] Don't show Easy Generator Icon if there's no output card
|
| [SB-1794] SB6 crashes by switching trigger-source to bxio XIO-0 / XIO-1
|
| [SB-1797] Some display features missing from available shortcut list
|
| [SB-1798] Selection behaviour is wrong when using shift key
|
| [SB-1800] No update for values of harmonics cursors in info dialog during loop
|
| [SB-1802] Scaling division for a channel does not reset history
|
| [SB-1803] Looped acquisition hangs if function generator calculation is active
|
| [SB-1804] X scrollbar is wrong when using trigger delay
|
| [SB-1806] Pulsewidth trigger examples in dialog not consistent with other examples
|
| [SB-1808] After zoom segment buttons are shown for unsegmented bus
|
| [SB-1812] Starting function generator with selected digital channels causes crash
|
| [SB-1818] FFT Max generates negative frequency
|
| [SB-1825] Jump to calculation result does not work for "Signal Info" calculation on FFT
|
| [SB-1826] Dynamic parameters between cursors not working
|
| [SB-1830] Trigger delay is written to first card only
|
| [SB-1831] "Jump to trigger" ignores trigger delay
|
| [SB-1832] Endless loop with 4GB card memory
|
| [SB-1833] Crash during preview data calcullation
|
| [SB-1834] Crash in preview display when signal length is multiple of 4GS
|
| [SB-1835] Last entries in Memsize combobox for FIFO mode do not use SI prefix
|
| [SB-1839] Easy generator with two synced cards crashes
|
| [SB-1856] Analog Display corresponds always with the preview display.
|
| [SB-1858] Stopping of all running calculations together over master node now working.
|
| [SB-1860] Possible crash when using function generator with FFT signals
|
| [SB-1868] Timestamp not added to A2D converted channels
|
| [SB-1877] Background color of signal and display comments adjusted to display background color.
|
| [SB-1878] Function Generator: Braces and sign errors removed.
|
| [SB-1895] Preview display is wrong for reference signals
|
| [SB-1907] Channel name dialog for digital channels does not grow |
| New Features
|
| [SB-192] New Zoom Function Dialog "Zoom to Range"
|
| [SB-1480] External tool to convert multiple sb6 files to another file format
|
| Improvements
|
| [SB-117] Show channel names matching the current scroll bar position while scrolling the digital display
|
| [SB-127] calculation function possible at digital boards too
|
| [SB-651] Allow drag and drop to remove assigned channels from output
|
| [SB-1036] Allow cursor information to be (optionally) added to printouts and screenshot
|
| [SB-1451] Enhance quality of print-outs
|
| [SB-1452] Enhance display settings in user settings dialog
|
| [SB-1453] Popup channel names feature : Possibility to set and store fade out time in user settings
|
| [SB-1454] Possibility to setup handles of spread display (hide and set size) and store these settings in the user file
|
| [SB-1460] Use a different icon for import handles to mark split file imports
|
| [SB-1467] Legend on screenshots / printouts that shows cursor information
|
| [SB-1471] If multiple channels overlap, the last one is always on top. Other chanels can not be seen.
|
| [SB-1473] Add placeholders for user-defined data to SB5 files
|
| [SB-1478] Add missing entries to SB5 files
|
| Fixed bugs
|
| [SB-495] SB6 crashes by changing the clockvalue while running in loop mode. (MX.3031)
|
| [SB-559] Rarely program crash at program close at loop-recording.
|
| [SB-1455] Wrong error message when external clock not locked
|
| [SB-1456] Reducing number of harmonics does not remove old entries
|
| [SB-1457] Predefined text for support mail contains wrong characters under linux
|
| [SB-1462] Importing wave file with windows line endings in header causes crash
|
| [SB-1463] Wrong minimal sample rate using PLL on MI.20xx cards
|
| [SB-1464] Crash when running loop and trying to close program
|
| [SB-1465] Calculations made on channel group containing invalid channels freezes/crashes Sbench
|
| [SB-1466] Screen shot / print not properly working
|
| [SB-1468] Switch the clockmaster between two MI cards not possible. Only one card is be displayed in menu.
|
| [SB-1469] Crash entering sig0() (without x) into function generator
|
| [SB-1472] Segment history mode button is always active in Spread Display
|
| [SB-1474] Easy generator can not generate data for channel 0 and 2 only
|
| [SB-1479] SB6 crashes with two MI. boards in sync-mode (2xcs end) by taking single shot or starting loop mode.
|
| [SB-1482] Creating screenshot of digital display with bus causes crash
|
| [SB-1483] Crash during binary export
|
| [SB-1489] Painting errors in display with multiple y scales
|
| [SB-1492] Behaviour of calculation dialogs inconsistent
|
| [SB-1493] Starting cycle based calculation in loop with large memory creates engine block error
|
| [SB-1495] Clicking first channel of second card activates wrong channel trigger
|
| [SB-1498] Possible deadlock in average calculation
|
| [SB-1499] Minimum time wrong in "zoom to" dialog
|
| [SB-1500] Four FFT with 1MS cause "out of memory" error
|
| [SB-1502] Calculation AutoStore uses wrong value after setup load
|
| [SB-1504] Starting calibration during looped acquisition causes crash
|
| [SB-1515] Labelling is wrong in "Set visible area" dialog for y axis
|
| [SB-1519] Cannot delete a A2D conversion by pressing DEL on Calculation or Digital node
|
| [SB-1520] Dropping digital channels on "Digital output" node does not assign to output |
| New Features
|
| [SB-87] Export digital data as ASCII VCD file
|
| [SB-1172] New function: Simple signal generator
|
| [SB-1235] New function: Formula Interpreter
|
| [SB-1274] Autosave of recordings or calculations with file name increment.
|
| [SB-1369] New user setting to add imported channels automatically to displays
|
| [SB-1419] New function: Concatenation of signals
|
| Improvements
|
| [SB-112] Optimize recalculation when moving cursors or scrolling windows
|
| [SB-145] Highlighting of signal that is near cursor to determine which signal is currently seen
|
| [SB-924] Allow synced boards to be used without synchronization
|
| [SB-1151] Store language selection in user specific settings and only on demand
|
| [SB-1266] Drag Import node to analog display
|
| [SB-1315] Allow re-enabling of preview data calculation
|
| [SB-1320] Dropping channel on splitter lines causes removal of channel
|
| [SB-1336] Do not re-run calculation jobs after acquisition if source is imported channel
|
| [SB-1345] Allow user to specify directory for autostore
|
| [SB-1346] Save settings dialog on application close enhanced
|
| [SB-1349] Setup dialogue for binary import without matching header file
|
| [SB-1351] Add samplerate to ASCII file header
|
| [SB-1371] Avoid message box when switching trigger mode to Single on digital cards
|
| [SB-1426] Store Data + Config and load both on different instance is not working properly for spread display
|
| [SB-1444] Spread Display: custom unit signal with shifted offset are not shifted in display but show original zero-line
|
| Fixed bugs
|
| [SB-50] Change samplerate in acquisition loop: loop hangs or program crashes
|
| [SB-97] If first or last entry of the info dialog is selected, pressing of up or down arrow key will affect display scrolling
|
| [SB-242] Opening FFT settings while first calculation is still running crashes SBench
|
| [SB-253] Mathematical/Analog Calculation only allows for one signal to be an averaged channel
|
| [SB-308] Shortcuts do not work if undocked dialog has focus
|
| [SB-311] Custom unit axis scales does not use the corresponding channel color
|
| [SB-352] Listbox selection of Pretrigger sometimes disappears in Looped Multi Acquisition
|
| [SB-363] Deleting FFT calculation used as source for averaging calculation leaves nested calculation without source
|
| [SB-566] Repaint of calc signals although not in a calc loop
|
| [SB-607] Toolbar for digital display is not updated properly, when using digital displays
|
| [SB-609] Behavior of "Sync all displays in one group" is weird
|
| [SB-682] When Lvl1 column in trigger dialog is not shown, changing the mode scrolls trigger dialog horizontally
|
| [SB-750] Deleting calculated source of a digital calculation does not set destination calculation invalid
|
| [SB-852] Later changing FFT setting of simultaneously generated FFTs has effect on both calculations
|
| [SB-902] Changing sample rate in a loop does not change frequency axis of Averaged FFT properly
|
| [SB-992] Crash when using a M2i.3132-exp FIFO setup for M2i.3122
|
| [SB-1101] Behavior differs when disabling calculation source for various calculations
|
| [SB-1236] Disable only one of a few active FFT calculations: more than the disabled one are stopped.
|
| [SB-1237] Some older data files can not be imported to latest SBench6 version
|
| [SB-1249] Cursor keys do not work in channel trigger pulsewidth spinbox
|
| [SB-1259] Typing fractional clock frequencies can only be done when entering decimal separator after all numbers
|
| [SB-1261] Crash, when closing Sbench while having manual clock edit active
|
| [SB-1263] Adding channels to display while display is still calculating data does not display new channels
|
| [SB-1278] Deadlock changing FFT settings directly after mem settings
|
| [SB-1297] Multiple starting/stopping of a looped acquisition having average calculation active generates error
|
| [SB-1301] Changing "Show max numbers that fit in visual range" does not affect existing displays
|
| [SB-1327] After open up config file, SB6 shows signals in preview display and signal display without single-shot or loopmode is started.
|
| [SB-1328] Calculation on "Cursor" area can be wrong
|
| [SB-1329] Calculation on imported channels are still visible after deleting source
|
| [SB-1330] SBench does not unlock unused cards after start
|
| [SB-1331] Race condition can cause crash if user stops streaming
|
| [SB-1332] Y area zoom not disabled if spread Y axis is selected
|
| [SB-1333] FFT display "block not found in cache error" if update value of averaged FFT signal is set to 1
|
| [SB-1334] Position of FIR result is wrong
|
| [SB-1335] Cursor-based FIR calculation does not show progress
|
| [SB-1340] Icons missing in HTML help
|
| [SB-1342] Spread Display crash when enabling additional channels
|
| [SB-1344] 128 MS data and only a little part at t-axis visible: No display update when using horizontal scrollbar.
|
| [SB-1347] Some files are left open in autostore
|
| [SB-1350] Bugfix "Block not found" at ASCII import of big files (a few of ten MB) with a few channels.
|
| [SB-1353] Possible crash at certain caching levels
|
| [SB-1354] Drag and drop of sb6dat files with overwrite actual signals are now closing the belonging file of the overwritten signals.
|
| [SB-1355] Exporting digital bits together with analog channels causes wrong signals at re-import
|
| [SB-1356] File ending of "Auto stored" files is always .sb6dat, even if file format is set to wave or binary
|
| [SB-1362] Loading config file causes error in analog display
|
| [SB-1373] At program start don't provide unsupported boards (MICX-outputs).
|
| [SB-1379] Auto generated channel name not replaced if manual name is empty
|
| [SB-1397] Base Version calculations incorrectly labeled as Pro-Version
|
| [SB-1399] Crash if NumberXChannels in header file is missing
|
| [SB-1401] No context menu on "FileName" node
|
| [SB-1404] Import of binary data causes "block not found error" using specific memsizes
|
| [SB-1406] Histogram calculation crashes SBench
|
| [SB-1408] Export of digital data in SB5 and ASCII format creates error
|
| [SB-1409] Pressing cancel on ASCII import data type dialog creates error
|
| [SB-1410] Various errors on data import/export
|
| [SB-1412] Custom unit scales not displayed after loading setup
|
| [SB-1418] Various display settings are not available for shortcuts
|
| [SB-1421] Function generator cannot be called directly after opening SBench
|
| [SB-1422] MI.30 Interlace: waste sample at the second half corrected
|
| [SB-1424] Replaying data from ASCII file does not work
|
| [SB-1425] Some Printer settings do not work correctly
|
| [SB-1429] Most keywords missing in "Index" tab in assistant
|
| [SB-1436] Channel trigger dialog does not display correct HIGH level
|
| [SB-1437] Locked cursors not updated at new acquisition |
| New Features
|
| [SB-73] Label with documentation on signal in display window
|
| [SB-76] New calculation: multiple recording - segment average
|
| [SB-554] Averaging of Multiple Recording blocks
|
| Improvement
|
| [SB-285] Signal display shows no signal clipping at bottom. On top, the display works fine and shows the signal clipping as in signalpreview.
|
| [SB-414] Drag-and-drop of channel from display to another now removes channel from first display
|
| [SB-420] Make multiple selections in channel dialogs now alike with general conventions.
|
| [SB-446] Better error message if no channels are enabled
|
| [SB-686] Switching from ABA to other modes removes slow ABA channel from display
|
| [SB-759] SBench icon gets scaled on Win7 desktop
|
| [SB-764] Optimize Fifo online data display
|
| [SB-856] Store lock status and position of cursors in setup
|
| [SB-923] MI: write of SPC_Syncstart for boards with no sync-option
|
| [SB-988] Add tabs to switch/toggle between full-sized display
|
| [SB-1078] Use mouse wheel in display for scrolling
|
| [SB-1185] Output channels dialog for 72xx cards output levels row description cut off and no double click on card node possible
|
| [SB-1198] Allow positioning of display tabs
|
| [SB-1203] Use maximum clock as default
|
| [SB-1207] Select an edge type if user selects edge in pattern trigger dialog
|
| [SB-1220] Ratio selection on custom unit does use Si base unit in destination box, and derived base (mV) in source box
|
| [SB-1221] Decrease used PC RAM at Rec-Std loops.
|
| [SB-1246] Show device connector names as tooltip in channel dialog
|
| [SB-1247] Sort channel names in channel dialog in alphabetical order
|
| [SB-1289] Browse button in export dialog should use current file/path instead of default SB6 Path
|
| [SB-1311] Channel dialog : Show source information of imported channels as tooltip (cardtype, serial number, original channel)
|
| [SB-1318] Add zero level to signal generator
|
| Bugs
|
| [SB-102] Curious behavior of signals addition function when using cursors
|
| [SB-106] Multiple MI card bugs
|
| [SB-241] Cached FFT still requires file path to be valid
|
| [SB-295] No horizontal scrollbar after changing clock
|
| [SB-379] Some displays are updated too often
|
| [SB-426] Changing digital bus format settings (Hex <-> binary) has no immediate effect, but requires new recording.
|
| [SB-453] FFT display showing averaged FFT signals gets way too many display updates
|
| [SB-509] Trigger level of disabled channel trigger editable
|
| [SB-520] User offset appears with factor -2 in Display
|
| [SB-598] Fast Enable/Disable channel 1 via mouse wheel in loop mode deadlocks SBench.
|
| [SB-672] Preview display with ABA data does not look correct.
|
| [SB-720] Memory leaks at shutdown
|
| [SB-751] Weird behavior of D_to_A calculation with or without single-bit mode
|
| [SB-840] FTT - Harmonics Cursor: default frequency for mirror cursor is wrong
|
| [SB-853] Changing settings in Info dialog (right click) temporarily disables displayed values of all items
|
| [SB-884] Fast mouse wheel enable/disable on AI channel in loop changes wrong anchor, leads to error and freezes SBench
|
| [SB-917] MI/MC/MX using wrong samplerate in quartz mode
|
| [SB-919] undo/redo zoom not working correctly when using x-axis scroll bar
|
| [SB-927] MI: FIFO + MR @ 2 ch: corrupted data
|
| [SB-944] Data import with overwrite before first recording can crash SBench
|
| [SB-973] Using dynamic parameter calculation in FFT display displays wrong cursor values in info dialog with next single recording.
|
| [SB-981] "Value in line 6 is out of Range" while changing clockmode "ext.clk" to "ext.clk with divider"
|
| [SB-989] Extremely long channel names crash SBench with next start
|
| [SB-1056] Removing all channels while display is painting does not stop display
|
| [SB-1095] Creating signal calculations on inactive channels leads to either errors or weird behavior
|
| [SB-1152] Cursor select button in digital display does not show actual color on Windows 7
|
| [SB-1153] Re-sorting digital channels sets locked cursors on wrong channel
|
| [SB-1154] Jump to next/previous edge buttons on a digital bus crashes SBench
|
| [SB-1157] Using "Define Zoom Area" in analog display invalidates calculation based on cursors
|
| [SB-1158] ASCII import does not work, adds more channels than (should) exist in file
|
| [SB-1159] Comments with fixed position do not have Y-position of mouse pointer
|
| [SB-1160] Display synced acquisition from pure binary file returns error
|
| [SB-1161] Cache is set up twice when using synced cards
|
| [SB-1164] Spread Display didn't show signal after color change
|
| [SB-1167] Crash if using Pure Binary split file with synced cards
|
| [SB-1168] Export of analog and digital channels in one file causes crash
|
| [SB-1170] Crash if calculating preview data after synced FIFO acquisition
|
| [SB-1173] Wrong color for time scale used in spread display while FIFO mode is running
|
| [SB-1174] Display comments not stored in setup files
|
| [SB-1175] Sometimes bus data disappears from digital display after a new acquisition
|
| [SB-1176] Synchronized displays : Scrolling in digital display will not update other synchronized displays
|
| [SB-1177] In ABA mode disabling channels does not disable corresponding ABA channels
|
| [SB-1178] Preview display is wrong in gate mode
|
| [SB-1179] Prg. crash at config file load with converted analog signal to digital one and binning a few bits to a digital bus.
|
| [SB-1180] Timestamp settings not restored after loading setup
|
| [SB-1181] Import of exported digital channels results in weird default channel names
|
| [SB-1182] Using "File Browse" button in Export dialog does not display any files, although they do exist
|
| [SB-1183] Combining signals to bus with "add to display" prevents new and previous bus signals from being displayed
|
| [SB-1184] 2030 Interlace with user offset: no identical display scaling for different channels
|
| [SB-1186] 72x1 can not start with all channels enabled
|
| [SB-1188] ABA Mode start immediately crashes SB6
|
| [SB-1189] Selecting "No" on "no trigger source" dialog unnecessarily repaints preview display
|
| [SB-1190] Preview display shows wrong data for slow ABA channel
|
| [SB-1192] Disabling all channels causes crash
|
| [SB-1193] Samplerate in sync using external clock with divider is wrong for slave cards
|
| [SB-1194] Setup of external clock is done for all cards in sync
|
| [SB-1195] After using spread button Zoom Full Signal shows wrong time scale
|
| [SB-1196] When channels being dis-/enable in loop mode, the display reacts sometimes only for disable. Re-enabled channels don´t come back on screen.
|
| [SB-1201] No optical difference between enabled and disabled check boxes
|
| [SB-1202] External trigger table does not show level columns for M3i
|
| [SB-1205] Store active color palette in config/user file
|
| [SB-1210] Preview Zoom-Cut incorrectly changes size, when deactivating channel in loop
|
| [SB-1211] Deactivating all channels with running calculation crashes/deadlocks SBench
|
| [SB-1217] Trigger setup dialog and analog display do not respect user offset in trigger levels
|
| [SB-1218] Switching between sample/time using pulse width trigger crashes SBench
|
| [SB-1223] Using shortcut to start single acquisition immediately crashes SBench
|
| [SB-1224] Display shows signal but channel name is not visible
|
| [SB-1227] Adding single channel from A to D conversion to display causes crash
|
| [SB-1229] Jump to edge function crashes SBench, when digital display and analog display is synced
|
| [SB-1230] User offset adjustment reports driver error. (SB6-MI.4031)
|
| [SB-1232] Scale of signal display is wrong by using external clock without divider when used the divider feature before with factor >1
|
| [SB-1233] Save/reload of config file with histogram content is not able to run. Error "block not found in cache/file"
|
| [SB-1240] No context menu on "Calculation" node
|
| [SB-1241] Starting analog calculation before first acquisition crashes
|
| [SB-1244] Adding channels to display while display update is in progress causes some problems
|
| [SB-1245] SB6: Clock menu: User is able to adjust frequency of external clock input up to 210 MHz. MI.3025
|
| [SB-1250] ASCII import of little files: nothing happens
|
| [SB-1251] Crash after disabling analog channels after FIFO acquisition
|
| [SB-1252] FIFO stream in spread display does not show data
|
| [SB-1253] Removing some disabled channels from spread display removes all channels
|
| [SB-1254] Stopping synced FIFO acquisition causes lock up
|
| [SB-1255] Disabling custom unit does not update spread display
|
| [SB-1256] Leaving calibration dialog with ESC does not stop running calibration
|
| [SB-1257] Importing file with renamed channel causes additional channels to appear
|
| [SB-1258] Crash after reloading config with signal average calculation
|
| [SB-1260] Loading setup from M3i.4861card using a M3i.484x card creates empty time domain calculation channel
|
| [SB-1264] Time axis during streaming is wrong
|
| [SB-1265] Calculation of needed cache size is wrong in histogram job
|
| [SB-1268] Disabling channel changes number of visible channels in spread display
|
| [SB-1272] X Offset not stored for split wave files
|
| [SB-1273] Zoom setting of loaded setup file not always restored
|
| [SB-1275] Some Screenshot/Print functions do not work
|
| [SB-1276] Crash if displaying only data from second and third card in sync
|
| [SB-1279] Changing colors in color palette dialog does not update preview until dialog is re-opened
|
| [SB-1280] Block not found if streaming with some channels disabled
|
| [SB-1281] FIFO stream after standard acquisition shows only small signal
|
| [SB-1282] Custom unit not accepted if min or max is zero
|
| [SB-1283] Signal data is displayed at wrong channel during stream
|
| [SB-1284] Custom Unit is wrong if amplitude setup is all positive
|
| [SB-1286] Trigger level lines do not respect additional y axis area
|
| [SB-1288] Loading a setup with FFT can lead to randomly delayed FFT display update.
|
| [SB-1290] Imported FFT channels do have wrong frequency axis
|
| [SB-1291] Sometimes channels disappear from spread display after channel setting is changed
|
| [SB-1293] Add channels to display dialog of the spread display is not working correctly
|
| [SB-1294] Average channel name changed after loading setup
|
| [SB-1298] Setup store of averaged FFT jobs mixes up destination/calculation channels
|
| [SB-1299] Cursors in spread display do not show sample position and raw data
|
| [SB-1300] Clicking channel in display to bring it in front in preview does not work in spread display
|
| [SB-1303] Data pointer error when adding/removing channels to/from display
|
| [SB-1304] Displayed file size for preview calculation is wrong if using split files
|
| [SB-1305] Increase maximum for manually setting visible stream length
|
| [SB-1310] Sample offset and first data block in split file do not match
|
| [SB-1314] Digital channels from A2D-conversion are added to FFT and Histogram displays on "Add to displays"
|
| [SB-1317] Adding digital file channels to display causes crash
|
| [SB-1321] Importing split file where one card's data has length zero causes crash
|
| [SB-1322] ASCII Export/Import of digital data does not work and crashes SBench
|
| [SB-1323] Export in other formats does not necessarily require a Professional Version
|
| [SB-1325] Export/Import of AI channels as hex does create more channels
|
| [SB-1326] Memory leak causes crash after frequent streaming restarts |
| New Features
|
| [SB-142] Fast scrolling with cursor keys updates scrollbar during scrolling process
|
| [SB-205] New zoom commands: rect zoom but only horizontal/vertical
|
| [SB-773] Import-as-one for split files
|
| [SB-834] Names, units and comments support full UNICODE (Japanese, Russian, Chinese, Greek)
|
| [SB-960] New display type: spread display
|
| [SB-963] New print command: print area between cursors
|
| [SB-964] New calculation: FIR filter calculation
|
| [SB-965] New calculation: acceleration speed calculation
|
| [SB-966] Improved ASCII export: channel info in ASCII file
|
| [SB-967] Span of x-axis can be set by user for FIFO display
|
| [SB-988] Added tabs to switch/toggle between full-sized display
|
| [SB-991] Added "remove all channels but this" to context menu in displays
|
| [SB-1004] Signal shadow mode for more easy differentiation between HIGH and LOW values in digital displays
|
| [SB-1031] Print dialog reworked and enhanced
|
| [SB-1054] New zoom command: Zoom to cursor area
|
| [SB-1059] New dsplay command: Hide Y scale in displays
|
| [SB-1072] Extend ASCII dialog to write comma seperated files (CSV)
|
| [SB-1073] Group names for signal calculations resorted
|
| [SB-1077] Set height of digital channels so that all channels are visible
|
| [SB-1089] Automatically refresh card list after user started control center
|
| [SB-1112] Scroll to end of info dialog if new calculation entry has been appended
|
| [SB-1127] Use of native file path separators on Windows systems
|
| [SB-1129] Allow import of WAVE files without header file
|
| [SB-1140] Call "Setup Save As ..." when clicking "Setup Save" button if no setup is loaded
|
| [SB-1143] Show calculation area icon in calculation setup dialog
|
| [SB-1146] Only allow numbers and . in custom unit setup
|
| Bugs
|
| [SB-131] "Show full signal" and "Show full area" removes x-axis
|
| [SB-177] Toggle Buttons bring back floating toolbars into main window when used
|
| [SB-556] Stop of an acquisition and aborting of a calculation on which an averaging calculation is running deadlocks SBench
|
| [SB-588] Copying of invalid signals can lead to error instead of warning dialog
|
| [SB-715] Start of FFT calculation on channel with no data prevents further recordings after looped acquisition
|
| [SB-731] Program crash while FFT + dynamic parameters in loop running and external signal amplitude change
|
| [SB-774] Re-Enable of Trig-En hangs SBench
|
| [SB-777] Digital signal-painting on right border different than on left border.
|
| [SB-786] Imported channels show wrong file size for preview calculation.
|
| [SB-793] false sync error message when disabling cards
|
| [SB-803] Trigger level in display only visible for first card
|
| [SB-804] inconsistency of displayed stop-level into right mouse menu after change them onto an other channel
|
| [SB-811] settings window overlapping: looks horrible
|
| [SB-813] No trigger line in all segments > 1 in multi mode without timestamp
|
| [SB-816] Analog display with Multi + Timestamp not properly updated/uses old data when selecting a slower sampling rate using oversampling
|
| [SB-827] Memsize field enabled for FIFO replay
|
| [SB-842] FFT - Harmonics Cursor - mirror frequency input with modifier MHz, kHz
|
| [SB-849] Selecting Quarz clock sources does not properly update samplingrate field
|
| [SB-859] Calculation menu allows wrong calculations for calculated digital channels
|
| [SB-865] Error during program start (SB6) with config file while the control-center is running
|
| [SB-876] ASCII import: nothing happens
|
| [SB-886] Files for temporary calculations are created in application and not in data directory
|
| [SB-891] Samplerate info of FFT signals is wrong
|
| [SB-905] Program crash at 70xx replay start with imported signals.
|
| [SB-936] After aborting replay status bar shows "Acquisition aborted"
|
| [SB-941] Display does not show any data until manually updated
|
| [SB-946] Import of data file that contains channel comments creates additional "emtpy" comment
|
| [SB-948] Zoom undo/redo with channel comments in display sometimes does not display them properly.
|
| [SB-950] When converting a DI to AI in "Single Bit Mode", the lower voltage is ignored and always zero volt used.
|
| [SB-953] Copy as reference on a calculated digital channel produces high CPU load and deadlocks SBench with next card start.
|
| [SB-954] DI-to_AI conversion on calculated channel does not recover from deactivating source channels
|
| [SB-962] Start replay of imported SB5 file with calculated preview data causes sometimes crash
|
| [SB-968] Calculations need to re-run if user sets custom unit
|
| [SB-969] Changing calculation area does not re-start calculation
|
| [SB-970] Can not select "Cursor" as calculation area for FFT signal
|
| [SB-971] Calculation on cursor is off one sample if cursors in negative time area
|
| [SB-974] Fifo replay of imported SB5 data causes crash
|
| [SB-975] File suffix of converted files can be wrong
|
| [SB-979] Changing file path in FIFO mode crashes
|
| [SB-983] No error if file for standard replay is too short
|
| [SB-985] Standard Single mode - not possible to program setup with posttrigger > memsize
|
| [SB-990] Crash when removing inactive channels from a display
|
| [SB-993] Time values of FIFo display not readable during first recording after setup load
|
| [SB-994] Crash when pressing "Abort" button of preview calculation in FIFO mode
|
| [SB-1000] Crash on close when having overrun in FIFO mode storing to splitfile
|
| [SB-1001] Crash when using histogram calculation
|
| [SB-1002] Aborting a file export does not ask for confirmation and creates engine error message
|
| [SB-1003] Export to pure binary file does not respect custom units
|
| [SB-1006] second color palette with digital displays: signal name background changes not to configured background color
|
| [SB-1010] Cannot set maximum interlace clock in quarz mode
|
| [SB-1021] Multi/Gate/ABA: Wrong maximum pretrigger values in list box when all channels are active
|
| [SB-1034] Clicking cancel on "Setup Display Colors" Dialog unnecessarily recalculates/repaints the channel data in a display
|
| [SB-1038] 60xx fifo replay: rarely program crash
|
| [SB-1039] M2i: one sync board and one none synced board: successfully using of external clock depends on board open order
|
| [SB-1040] FiFo replay: heavy program load at overrun
|
| [SB-1041] FiFo recording: time display x- axis marking not readable (painting over each other)
|
| [SB-1043] sb6dat file import: nothing happens
|
| [SB-1044] 60xx demo card: fifo replay of 12 bit input data not possible: "conversion failed"
|
| [SB-1051] Display of digital MULTI signals crashes
|
| [SB-1055] Clock combo box does not get focus if user clicked up/down arrows
|
| [SB-1062] Some calculations do not work if german language selected
|
| [SB-1067] Copy as reference creates wierd channel names
|
| [SB-1069] Activating/deaktivating channels in mode dialog weirdly interacts with automatic add/remove of displays
|
| [SB-1071] ASCII export fixed width does not wor properly and HTML Doku shows old export dialog window.
|
| [SB-1080] Arrow buttons work upside down in time mode
|
| [SB-1081] Activating disabled analog channel adds this channel to FFT display
|
| [SB-1085] Windows 7: setup color palette doesn't show color preview in main setup screen
|
| [SB-1086] Cursor delta Y(t) value of locked cursors on channels with a custom unit and a a ratio > 1:1 not always displayed
|
| [SB-1090] After FIFO overrun display does not react anymore
|
| [SB-1091] Channel names are not correctly updated after splitted acquisition
|
| [SB-1092] "file handle error" after splitted FIFO acquisition with displayed channels
|
| [SB-1097] Either hung acquisition, error or crash when rereactivating channels used in Spread Display
|
| [SB-1098] program crash: lock cursor on an imported channel then lock the same cursor to an real channel
|
| [SB-1099] Removing "keep in loop" option from FFT calculation can deadlock SBench
|
| [SB-1100] single shot not working after switching clock rate
|
| [SB-1102] filter of signals with more than 32 kS length: every 32 kS is a jump into the filter result
|
| [SB-1103] program crash: filter calculation of current view
|
| [SB-1107] Some buttons that should be disabled still available in streaming mode
|
| [SB-1110] Displaying channel from file imported by setup crashes
|
| [SB-1114] Streaming display's x axis values are wrong if x span is set
|
| [SB-1117] Dialog asking for import of split files appears twice
|
| [SB-1118] Empty comment appears during streaming
|
| [SB-1119] "Holes" during streaming with synced cards
|
| [SB-1121] Stopping cards in FIFO mode discards content of DMA buffer
|
| [SB-1122] Block not found after import of split file with synced cards
|
| [SB-1123] Crash at import of split digital acquisition
|
| [SB-1125] FiFo replay with split files: heavy CPU load after onboard RAM is filled
|
| [SB-1128] Info dialog scrollbar move to wrong position after new acquisition
|
| [SB-1132] Slope calculation does not work with multiple channels
|
| [SB-1135] Adding comment to file channel causes BLOCKNOTFOUND after re-import
|
| [SB-1137] Data not accessible after "Disk full" error
|
| [SB-1142] Missing y-srollbar using "Show full signal" button
|
| [SB-1149] Sync + Ext-Clock with divider can lead to error
|
| [SB-1150] Double-Click in display area while FIFO is runnig crashes SBench
|
| [SB-1158] ASCII import does not work, adds more channels than (should) exist in file |
| New Features
|
| [SB-330] Allow descriptions or comments to be added to channels and measurements
|
| [SB-538] Allow text comments to be added to displays or screenshots
|
| [SB-562] Setup calculations if no recorded signal valid/available.
|
| [SB-627] Cursor/Zoom mode buttons behaviour improvement
|
| [SB-790] Disabled channels no longer shown in display and export
|
| [SB-791] Show loaded file name as anchor node for files
|
| [SB-792] Show maximum acquisition length in mode dialog in FIFO
|
| [SB-795] Raw values disabled by default
|
| [SB-800] ASCII import as digital data
|
| [SB-825] Support of new M2i pulse stretch feature for all A/D and D/A cards TTL and BaseXIO TTL triggers
|
| [SB-826] Support of new M2i.60xx hardware data conversion modes
|
| [SB-833] Show available disk space in file settings menu
|
| [SB-836] Display BaseXIO data only when enabled
|
| [SB-839] Create FFT or histogram channel always with the same color of the source channel
|
| [SB-858] Possibility to use synced cards also as single cards if mutli license is installed
|
| [SB-873] Support for PXI trigger routing and MX.9010 card
|
| [SB-893] file and setup import by drag and drop
|
| [SB-894] Direct export in context menu of calculations
|
| [SB-906] Digital Board: assign output data: not possible to drag the parent entry from the InputChannels Tab to the OutputChannels Tab
|
| [SB-912] Avoid loading from setup files of newer SBench6 versions
|
| [SB-921] Display the parameter of the channel-table in "one line" for better shape.
|
| [SB-930] Store assigned digital input channels to digital output channels in config file
|
| [SB-935] Possibility to set default for "Overwrite channel?" question at file import
|
| [SB-938] M3i HF path: AC/DC offset compensation
|
| Bugs
|
| [SB-215] Trouble with pull down menus while program run in loop mode
|
| [SB-302] Scrollbar in histogram display always jumps to lower end
|
| [SB-437] SB6 crashes by changing the mode (standard multi / standard single) while running in loop mode.
|
| [SB-499] Terminationswitch for ext. clock termination without function.
|
| [SB-556] Stop of an acquisition and aborting of a calculation on which an averaging calculation is running deadlocks SBench
|
| [SB-708] Adjustment range of clock-input is wrong by using the clock divider (M2i.3026).Spikes in signaldisplay.
|
| [SB-714] FFT Calculation start on an inactive channel in a loop crashes SBench.
|
| [SB-730] histogram: By initiating another singleshot while the calculation of the histogram (singleshot before) is running, the program crashes.
|
| [SB-741] FFT Display of FFT calculation on an invalid channel (e.g. after setup load) contains two axis
|
| [SB-743] Creating two analog calculations crashes SBench
|
| [SB-744] "Copy as reference" on multiple selected calculated sources only creates one copy.
|
| [SB-749] Use D_to_A conversion with digital calculation channels as input only uses LSB channel
|
| [SB-783] Enabling EXT1 disables input channels on 702X
|
| [SB-784] Timestamp recording: after next recording pressing "Zoom to Full Segment" crashes SB
|
| [SB-789] Memory Setup: individual settings together with time entry doesn't work
|
| [SB-806] Some trigger modes are not correctly stored in setup file
|
| [SB-807] Crash if number of harmonics for dynamic parameter calculation is set to zero
|
| [SB-808] Error in FFT creation after loading config file
|
| [SB-809] Digital display is not updated properly to display the correct number of channels
|
| [SB-810] wrong x-axis scaling @ TS-RefClock mode
|
| [SB-812] cards do not trigger in sync, timestamp, standard-multi mode
|
| [SB-814] Error message using timestamp refclock
|
| [SB-815] Timestamp does not take clock oversampling factor into account -> timestamps calculated wrong
|
| [SB-817] Using M2i BaseXIO TTL triggers does not show modes in trigger table
|
| [SB-818] BaseXIO trigger of M2i cards always uses rising edge
|
| [SB-819] Channel trigger tab is shown even if only output cards are in SBench 6
|
| [SB-820] Buffer underrun while Fifo replay
|
| [SB-821] Import of SB5 Fifo files (*.sbs) shows error message
|
| [SB-823] Only lower 16 bits of timestamp displayed at line
|
| [SB-828] Using three cascaded MI cards hangs
|
| [SB-830] Maximum external clock value is wrong if interlace mode is active
|
| [SB-831] Jumping to previous segment does not work correctly
|
| [SB-835] Deactivating all channels when running in loop mode -> system freezes
|
| [SB-837] Changing trigger settings while running loop mode not working
|
| [SB-841] Activation of more than two average channels shows preview display error message
|
| [SB-843] Selection of invalid calculations possible on calculated digital channels
|
| [SB-847] Illegal analog calculation on histogram data is possible, leading to a crash
|
| [SB-848] After loading setup file software trigger in Std mode leads to "no trigger selected" warning
|
| [SB-850] Simultaneously added averaged FFTs not displayed, next run freezes or crashes SBench
|
| [SB-851] Maximum clock for quartz modes is wrong
|
| [SB-860] Data Export does not ask for overwrite confirmation when file with same name already exists
|
| [SB-869] Triggermode for BaseXIO triggers are not correctly set when using the dialog and not the trigger table.
|
| [SB-870] Error in clock dialog: M2i.4032 can be switched on 100MS/s - "Value in line 2 is out of Range" when it is selected.
|
| [SB-874] Analog and digital calculation function : Possibility to create two calculated channels with the same name
|
| [SB-875] Copies/Exports/Imports of averaged FFT channels creates weird Y-scales
|
| [SB-877] No export entry in channel context menu for digital and calculated channels
|
| [SB-878] Closing of analog display during Fifo acquisition causes crash
|
| [SB-879] Removing FFT leaves empty calculation node
|
| [SB-880] Wrong version on start button
|
| [SB-881] Analog display in fifo online mode shows some illegal options in toolbar and context menu
|
| [SB-882] Main window shrunked if analog and digital display is shown on start up layout
|
| [SB-888] Automatically generated calculation names not saved to config
|
| [SB-889] Average of FFT not changing scaling when source signal is changing scaling
|
| [SB-904] Not all renamed calculation names are stored in the setup file
|
| [SB-910] Crash if SBench6 is started without any hardware and windows menu entry will be clicked.
|
| [SB-918] Crash at replay if start button clicked more than once and data needed conversion
|
| [SB-929] Data conversion in FIFO modes causes crash
|
| [SB-931] Endless loop in replay data transfer if wrap around is enabled
|
| [SB-932] Enabled digital output channels are not correctly restored from config file
|
| [SB-934] Card enabled/disabled state in channel output dialog not correctly updated
|
| [SB-937] Transfer of digital output data incomplete if NotifySize != 0
|
| [SB-940] 7005 no recorded data visible for memsize of a few 10 MS
|
| [SB-942] Inactive DI channels are added to digital display by default, later adding not possible but forces complete data re-calculation.
|
| [SB-952] Copy as reference of DI channels from A/D cards crashes SBench
|
| [SB-957] "Tile displays" options in display context menu have no icons
|
| [SB-958] Full Fit zoom on synced displays creates empty scrollbars on window without focus. |
| New Features
|
| [SB-403] Support for output cards (analog waveform generators and digital pattern generators)
|
| [SB-124] Jump to bookmarks
|
| [SB-146] Set marker positions in display including position and zoom factor and jump to them by command
|
| [SB-528] Expand the jump to edge functions for digital data to work with digital busses as well
|
| [SB-557] Visual reminder which start location is used in Jump to location dialog
|
| [SB-561] Keyboard-Return press the Ok-Button in card selection dialog.
|
| [SB-592] Change default keyboard focus in calculation dialogs
|
| [SB-613] Display full install path in installer
|
| [SB-628] Possibility to display properties of channel (like length, bitwidth, ...)
|
| [SB-631] Selecting MULTI replay disables software trigger
|
| [SB-639] Show special icon if all channels of card are disabled
|
| [SB-653] Add also max. samplerate values for all possible no. of active channels to clock listbox
|
| [SB-660] Store tree status also in setup files
|
| [SB-671] Enable output channels after data assignment
|
| [SB-698] Jump to zoom bookmarks by double clicking rectangle
|
| [SB-703] Select cursor in jump dialog
|
| [SB-704] Add prefix for all different radix other than decimal
|
| [SB-727] Possibility to rename card labels
|
| [SB-733] SB6 doesn´t save color allocations in config file.
|
| [SB-753] Data export of calculated channels now possible
|
| [SB-772] Close split file after use
|
| [SB-781] close dialog: set "not save" as default entry
|
| [SB-797] disabled channel status not visible if the channel-tree is collapsed
|
|
|
| Bugs
|
| [SB-307] Digital calculation available for analog channels in demo mode
|
| [SB-355] Horizontal Scrollbar of analog display not properly updated on change of acquisition sizes
|
| [SB-357] Analog calculation allow recursive selection of its own calculation which leads to arror and crash on application close
|
| [SB-366] Re-enabling source channel of FFT does need one additional recording to start display of calculation again.
|
| [SB-371] Having more than one average calculation with different average numbers starts calculation with lower number again
|
| [SB-389] Pressing F1 caused "Page not found" in assistant
|
| [SB-390] Adding and removing digital channels in edge detection randomly changes level for other digital channels
|
| [SB-418] Channels imported from ASCII file are always 16 bit
|
| [SB-428] Letting bus function remove channels from display, changes order of data/channel names in display
|
| [SB-429] Deleting bus with subordinated channels displays re-integrated channels grayed out, although they contain valid data
|
| [SB-438] "Segment borders on/off"-button not available if first acquisition is looped
|
| [SB-458] Context menu on "analog calculation" channel is wrong, when calculation is based on FFT channels
|
| [SB-459] Renaming a channel from "analog calculation" from "Calculation Settings" dialog creates duplicates in channel list.
|
| [SB-460] Renaming a channel from "analog calculation" from context menu with FFT input channels crashes SBench
|
| [SB-464] Timestamp on only one card in sync creates error
|
| [SB-485] Crash if FFT and dynamic parameters run for some time
|
| [SB-502] First start after loading setup that includes histogram leads to "error in FFT display 0x00030001"
|
| [SB-506] SB6 doesn´t save the complete Trigger config
|
| [SB-531] EXT1 does not work on M2i.7021
|
| [SB-548] Displays of saved FFTs with active history mode have wrong scale(s)
|
| [SB-568] Crash if channel trigger level enabled for display with only calculated channels
|
| [SB-574] Trigger levels not matching current signal
|
| [SB-582] Changing name of calculation copies the calculation and stops working of it
|
| [SB-589] Cannot load setup if mode is STD_REC_MULTI
|
| [SB-593] Loading Setup with A-to-D conversion calculation crashes SBench
|
| [SB-594] Disabling analog input channel for an A-to-D conversion produces error. Deleting deleting these invalid digital channels crashes SBench.
|
| [SB-596] Selecting multiple channels for A-to-D conversion creates only one correct result.
|
| [SB-597] Deleting digital channels from a calculated digital bus (A-to-D conversion) crashes SBench
|
| [SB-601] Allow change of trigger modes in detailed dialog without setting levels to "trigger table values" every time.
|
| [SB-603] Deleting a D-to-A calculated channel crashes Sbench at the next start of acquisition.
|
| [SB-604] "Copy as reference" on digital channels crashes SBench
|
| [SB-608] Cursors in synched analog displays automatically move to the left in Loop Mode
|
| [SB-610] Duplicate active displays with segmented content does not work properly
|
| [SB-611] Click on "Jump to Trigger Position in Segment" button immediately crashes SBench
|
| [SB-612] Adding an channel containing yet valid segmented data to a new display does not provide "IsSegmented" information to diplays
|
| [SB-615] Entering a very high clock frequency leads to uint32 overrun and therefore to funny clock frequencies
|
| [SB-621] SB6 doesn´t save clock divider value of slave card in config file.
|
| [SB-630] Digital channels not aligned properly
|
| [SB-633] Replay of previously acquired data crashes
|
| [SB-641] Analog channel converter function ignores data sorting order
|
| [SB-652] Wrong data displayed for digital channel
|
| [SB-654] Crash after deleting digital bus
|
| [SB-658] German language for Tooltip
|
| [SB-659] Possible crash if setup with more than one FFT is loaded
|
| [SB-662] Loading setup twice can crash SBench
|
| [SB-669] No screen data is displayed when standard timestamp + ABA mode is used and A channel is in display
|
| [SB-674] Average Multi calculation on fast B-data segments leads to error
|
| [SB-675] Disabling a channel that has cursors locked on it crashes SBench
|
| [SB-676] Locking cursors to channels without data results in locked cursors on other source
|
| [SB-677] Some errors using single bit output modes of 7005
|
| [SB-678] Locked cursors on AI channels with custom unit automatically move to the left side of the display
|
| [SB-679] Info dialog shows disabled custom unit for locked cursors
|
| [SB-680] Segmented recording without timestamp does not create preview data
|
| [SB-681] Size of the info dialog is not restored from user file at program start
|
| [SB-684] Toggling setup windows does not toggle output mode and output channel dialogs
|
| [SB-689] Creating analog calculation for "cursor area" without active cursors generated error.
|
| [SB-690] Changing destination file via toolbar works only after focus change
|
| [SB-692] Having FFT and Analog display active in a loop lets display toolbar flicker
|
| [SB-693] Loading setup does not restore output loops value.
|
| [SB-694] Cycle calculations on "current view" do not finish and stay at 33% or 66%
|
| [SB-695] Copy as reference on AI channel creates error
|
| [SB-696] Results of two RMS noise calculations with different X-areas can be mixed up
|
| [SB-700] Crash in output channel dialog
|
| [SB-701] Display color dialog has no title bar
|
| [SB-702] Jump to edge does not work with segmented channels
|
| [SB-709] Scalefailure in signaldisplay while using the ext.clock with divider. (M2i.3026)
|
| [SB-710] 60xx: disable/enable of digital bits results into error message-box
|
| [SB-712] crash after a while with calculation active
|
| [SB-716] Average calculation on FFT adds averaged FFT channel to U(t) display
|
| [SB-718] Sometimes false display toolbar is shown when loading from user file
|
| [SB-722] Differences between RMS-Noise measurement SB5 and SB6 -> SB5 result seems to be plausible.
|
| [SB-726] Spectrum Control Center can not be started from startup dialog.
|
| [SB-728] Average multi available for FFT
|
| [SB-734] After rejecting the preview calculation after Fifo acquisition. No preview calculation is possible for further acquisitions.
|
| [SB-735] Start with multiple cards of the same type the clock diver is set to 2 instead of 1 by default
|
| [SB-736] Mode dialog, individual setting selection is not stored in configuration file
|
| [SB-737] Crash during Shift+Click selection in channel dialog
|
| [SB-738] Having FFTs of different Memsizes but same sampling rate in one FFT display incorrectly displays data points left alligned
|
| [SB-739] Which FFT channel is in a FFT window is not properly stored in setup
|
| [SB-740] No setting correction and error message if slave divider is set to 1 while master cards samplerate is set higher than max samplerate of slave card
|
| [SB-746] Loading Setup with FFT calculations and copied FFT channels mixes up calculated channels and can crash SBench
|
| [SB-747] Nested digital calculations are not calculated correctly after setup load and results are grouped under "Analog Input"
|
| [SB-748] De-activating one channel of an analog or digital calculation creates error
|
| [SB-752] ASCII Export of digital channels crashes SBench
|
| [SB-756] FFT calculation: between cursors / actual view produce wrong results
|
| [SB-757] Crash on Export under WIn 7 64 Bit
|
| [SB-760] 8 Bit data export causes crash
|
| [SB-763] Fifo online data is not shown on the first start
|
| [SB-767] Digital calculation does not work with 7021 card
|
| [SB-768] Default external clock is too big for 47xx
|
| [SB-769] Old segments lines after change of segment size
|
| [SB-775] Displaying digital bus causes crash
|
| [SB-776] Crash if started without card
|
| [SB-778] Painting digital data: vertical mismatch between name and signal
|
| [SB-779] Crash at drag-and-drop to output channels
|
| [SB-787] Digital display is updated way too often when selecting channels
|
| [SB-798] Using Wave or pure binary file as output source causes error
|
| [SB-799] Block not found after output start with some channel setups
|
| [SB-801] Clock output is not available for 70xx in external clock modes
|
| [SB-802] Pulsewidth does not work for M2i channel trigger modes |
| New Improvements
|
| [SB-90] - Display - Analog - Display grid calculation improved
|
| [SB-95] - Display - FFT - Scaling of FFT display improved
|
| [SB-111] - Dialog - Channel - Channel export directly from the channel dialog context menu
|
| [SB-139] - Display - Digital - Implementation of jump to edge functions for digital data
|
| [SB-167] - German language of system updated
|
| [SB-313] - Dialog - Trigger - Trigger levels can be changed when running in loop mode.
|
| [SB-346] - _Other - Move "Status update" setup from File Settings dialog to User Settings dialog
|
| [SB-378] - _Other - Allow channel selection by double click in "Add channel" dialog in calculation setup
|
| [SB-387] - Calculations - Added inverting pendants of digital calculations (NOR, NAND, XNOR)
|
| [SB-408] - _Other - Added enable/disable trigger feature
|
| [SB-514] - Dialog - Channel - digital boards: channel activation/deactivation improvement
|
| [SB-515] - Displays - Duplicate actual window
|
| [SB-537] - Display - FFT - Added option to enable mirror frequencies for harmonics cursors
|
| [SB-540] - Dialog - Channel - Copy to reference function enhanced to allow all sorts of channels as sources
|
| [SB-541] - Displays - Include activated cursors in screen shots
|
| [SB-543] - Displays - Added "screenshot" to display context menu
|
| [SB-558] - Help - HTML documentation for Jump dialog added
|
| [SB-444] - Display - Analog - Display of triggerlevel with a dashed line possible
|
| [SB-490] - _Other - Warning when loading a configfile with older version number
|
| Bugs
|
| [SB-59] - Calculations - moving a detailed current view into a long record, increased the current view slowly
|
| [SB-93] - Dialog - Clock - Multiple cards: sample rate of slave card can be changed to a value that is not valid due to divider limits
|
| [SB-101] - Display - FFT - FFT display shows negative x-axis values due to zooming or scrolling
|
| [SB-155] - _Other - screen shot: at history mode is only the last signal visible and not all previous ones
|
| [SB-201] - Calculations - After changing channel of FFT calculation the dnamic parameters are not calculated anymore
|
| [SB-232] - Dialog - Trigger - "AISetup:value in line 6 is not allowed" while enter triggerlevel-value in Channel-Trigger-Mode @ loop run
|
| [SB-297] - Dialog - Clock - SB6 sometimes stops run in loop-mode when changing the sampling clock
|
| [SB-318] - _Other - Calibration Routine do not start. (MI.3024)
|
| [SB-334] - _Other - Channel offset in last split file in SB6 file format is wrong
|
| [SB-347] - Dialog - Trigger - Cancel in dialog for trigger source enables this source
|
| [SB-349] - Display - Digital - Zoom error of imported digital channels.
|
| [SB-356] - Display - FFT - Averaged FFT not always displayed or calculated: freezes or crashes SBench
|
| [SB-358] - Calculations - Changing calculation settings to later use a calculated signal as source leads to calculation error
|
| [SB-359] - Calculations - Loading setups with nested calculations leads to "more source channels than available..." warning and crashes latest after two recordings
|
| [SB-361] - Calculations - Analog calculation of two FFT signals creates an analog u(t) signal
|
| [SB-368] - Calculations - ABA's _A channels show up in Average calculation setup dialog
|
| [SB-374] - Display - Digital - Locked digital cursors do not follow in sync group
|
| [SB-376] - Import Export - SB5 export is wrong for channel length >64k
|
| [SB-380] - Calculations - Copy Signal calculation on digital channel crashes SBench
|
| [SB-385] - Import Export - Imported signal from SB5 file is zero
|
| [SB-388] - Display - Digital - Moving locked cursors on digital channels does not follow mouse position properly
|
| [SB-391] - Dialog - Trigger - Click in trigger setup table always puts tables top row at the top of dialog if not all rows are visible at a glance.
|
| [SB-395] - Display - Digital - Progress bar for digital display does not disappear when update is ready.
|
| [SB-396] - Display - Digital - Cursor locked to wrong channel if original channel is removed from display
|
| [SB-397] - Display - Digital - Using horizontal transport arrows changes zoom level of display
|
| [SB-398] - Display - Digital - Names and order of digital channels in display and the screen shot do not match
|
| [SB-399] - Import Export - signal imports not saved to setup
|
| [SB-400] - Display - Digital - Loading setup with bus organized digital signals creates two identical busses. Deletion of both crashes SBench.
|
| [SB-401] - Display - Info dialog not updated when using cursors in sync'ed displays
|
| [SB-402] - Calculations - Convert to digital calculation crashes with signals longer than 32k
|
| [SB-405] - Dialog - Channel - Deleting a digital bus completely mixes up click order in channel dialog
|
| [SB-411] - _Other - SB6 crashes by clicking "Abort" button in card-calibration-window while calibration is running.
|
| [SB-412] - Calculations - "Peak to Peak" measurement shows different values (Peak to Peak / Signal Info / Sinus Info)
|
| [SB-413] - Calculations - Starting dynamic parameter calculation during loop causes "no valid data" error
|
| [SB-415] - Import Export - ASCII export one 8 Bit channel as hex: wrong data
|
| [SB-417] - Import Export - ASCII export settings not saved between two exports
|
| [SB-419] - Dialog - Channel - Shift+Click in channel dialog below last channel causes crash
|
| [SB-421] - Import Export - Export of digital channels not starting with ch 0 uses wrong data
|
| [SB-422] - Calculations - Digital calculation is faulty
|
| [SB-423] - Import Export - Exporting one channel from synced cards hangs
|
| [SB-424] - _Other - Changing storage from tmp file to real file resets memory setup
|
| [SB-425] - Dialog - Channel - Shift+Click on a channel that has been unmarked with Ctrl+Click before crashes SBench
|
| [SB-429] - Dialog - Channel - Deleting bus with subordinated channels displays re-integrated channels grayed out, although they contain valid data
|
| [SB-430] - Dialog - Channel - Copy signal on digital channel with no valid data generates error.
|
| [SB-432] - Dialog - Channel - Combining more than 32 digital channels to a bus is possible but bits are always zero
|
| [SB-433] - Display - Digital - Having more than 512 digital channels in one single digital display crashes SBench
|
| [SB-434] - _Other - Sorting of digital bits in analog channels is incorrect
|
| [SB-435] - _Other - Crash at preview data read
|
| [SB-436] - Dialog - Mode - Crash at shutdown if focus in memory combo box
|
| [SB-441] - _Other - Need to set DOUBLEOUT for both channels
|
| [SB-442] - Dialog - Channel - Calculations (and copying) of multiple digital channels can crash SBench
|
| [SB-443] - Display - Y Spread and Ignore Timestamp display setting not stored in config file
|
| [SB-447] - Display - Analog - Multiple scales on analog display : Cursor lines will not be paint at correct mouse position.
|
| [SB-449] - Dialog - Clock - SB6 crashes by clicking the clockmode "External Clock with divider"
|
| [SB-450] - Dialog - Clock - Problem with scaling of time axis at syncmode. (M2i.4022-exp and M2i.3024)
|
| [SB-451] - Display - FFT - Very left scale value on f-axis in FFT display can be cut off in certain zooms
|
| [SB-452] - Dialog - Channel - Settings for FFT channel allow custom value and divider
|
| [SB-454] - Calculations - Averaging of Histogram channels leads to error message
|
| [SB-455] - Calculations - The result of an averaged FFT of an averaged analog signal is calculated too often
|
| [SB-457] - Calculations - "Convert to digital" is possible on FFT and histogram channels and crashes SBench
|
| [SB-463] - Display - Histogram - Records can not be stored in the display by using the historyfunction as usual.
|
| [SB-466] - _Other - Starting a calibration for MI card crashes SBench
|
| [SB-468] - _Other - Crash if MI.70xx is synced
|
| [SB-469] - _Other - MI creates wrong "Driver too old" error
|
| [SB-470] - Displays - Add channels to display dialog shows channels that do not fit.
|
| [SB-472] - Displays - FFT and Histogram channels can not be added to displays using the add to display dialog.
|
| [SB-473] - Dialog - Trigger - Pattern trigger dialog does not fill in current values in comboboxes
|
| [SB-474] - Dialog - Channel - Changing DI termination by mouse wheel does not work for all channels
|
| [SB-475] - _Other - Crash if all digital channels are disabled
|
| [SB-476] - _Other - External clock ranges are wrong for MI70
|
| [SB-479] - _Other - External clock not disabled after switch to quartzmode
|
| [SB-480] - _Other - Cannot use single card out of sync group
|
| [SB-481] - Dialog - Clock - Synced cards run at extern-clock-mode although extern clock is not connected.
|
| [SB-482] - Dialog - Channel - Visibility of output channels is not stored in setup
|
| [SB-484] - Dialog - Channel - Crash if mouse wheel is used in channel dialog
|
| [SB-492] - Displays - History mode for FFT and digital displays does not work anymore
|
| [SB-494] - Dialog - Clock - Scalefailure in signaldisplay while using the ext.clock. (MX.3031)
|
| [SB-503] - Display - Histogram - Tabular display of histogram does not work properly with certain zoom levels and is not stored in setup file
|
| [SB-504] - _Other - Not all replay samples transfered if number of samples > size of DMA buffer
|
| [SB-505] - _Other - Synced replay cards do not work
|
| [SB-508] - Displays - After loading from config file all display settings became equal.
|
| [SB-511] - _Other - No standard recording with big memsize possible: status line display: overrun
|
| [SB-513] - Display - Digital - Digital display flickers, when choosing an other application as the active one or switch back to SB.
|
| [SB-517] - _Other - Engine error if user sets offset for M3i.21xx
|
| [SB-521] - _Other - 70xx recording start produce driver error at register SPC_DATA_OUTBUFSIZE
|
| [SB-523] - Display - Possible to drag zoom rect outside display
|
| [SB-524] - Calculations - calculating dynamic parameters from FFT with Voltage scale -> wrong values
|
| [SB-526] - _Other - Switching to external clock with divider causes engine error
|
| [SB-527] - Display - Histogram - Error text for histogram display is wrong
|
| [SB-529] - Display - Digital - Removing a bus from display that contains another bus removes works incorrect
|
| [SB-530] - Dialogs - Drag and drop to remove channels from displays does show the "not allowed" icon also for correct channel mode destination.
|
| [SB-532] - _Other - Driver error at first acquisition with M2i.7021
|
| [SB-533] - Dialog - Trigger - using pattern trigger and/or mask produce error
|
| [SB-534] - Display - Digital - only half of programmed memory appears in display
|
| [SB-542] - Calculations - Displays of saved averaged FFTs have wrong scale(s), and can crash SBench.
|
| [SB-544] - Display - FFT - Cursor tracking does not work with harmonics cursors
|
| [SB-545] - Calculations - Changing average settings of a channel leads to wrong results.
|
| [SB-547] - Dialog - Trigger - Changing edge in pattern trigger dialog has no immediate effect
|
| [SB-550] - Dialog - Channel - Closing dialog from channel context menu "settings" on copied channels can crash SBench
|
| [SB-552] - Dialog - Channel - Changing Memsize with a copied FFT signal crashes SBench
|
| [SB-553] - Dialog - Channel - Starting an acquisition with no enabled channels freezes SBench
|
| [SB-555] - _Other - Older configs show digital jump dialog after setup load
|
| [SB-560] - Displays - Window change with keys doesn't work.
|
| [SB-565] - Dialog - Clock - Using of mouse wheel over samplerate listbox jump to lowest samplerate value.
|
| [SB-567] - _Other - "Recent setups" enabled during loop run
|
| [SB-572] - _Other - Starting M2i.7020 fails with driver error
|
| [SB-580] - Display - Digital - Screenshot of digital display always uses color palette 1
|
| [SB-583] - Displays - Segment Control Buttons not visible if Acquisition with Multi but without Timestamps
|
| [SB-584] - Display - Multi + Timestamp + Segment View: Multiple Jump to Trigger Position changes scaling and position
|
| [SB-585] - Calculations - Multi Average: Trigger Position wrong after Average
|
| [SB-586] - Calculations - Multi Average: Segment Navigation not available
|
| [SB-587] - Calculations - Multi averaging is wrong if segment jumps over block boundary
|
| [SB-590] - _Other - Crash if calibration dialog is opened for 70xx
|
| [SB-591] - Calculations - Multi averaging hangs in loop mode |
| New Improvements
|
| [SB-316] - Channel Dialog - Make rows in channel dialog customizable to have the possibility to add information like scale and custom unit
|
| [SB-72] - Shortcuts - add shift/ctrl/alt to keys
|
| [SB-85] - Calculations - Store calculation results like FFT in SBench 6 cache to improve speed
|
| [SB-115] - Import Export - Recent file list for import, config, layout
|
| [SB-119] - Display - screenshot of digital displays: label names on the left border before the signal lines, like a Logic Analyzer and the digital display itself
|
| [SB-156] - Display - Switching between cursor mode and define zoom mode improvement
|
| [SB-157] - _Other - SB Info information: adding if exe is release or debug build
|
| [SB-169] - Display - Delete sync group function
|
| [SB-194] - Display - Display slow ABA data in display during FIFO acquisition
|
| [SB-211] - Calculations - Calculation reset entry always shown in context menu even though calculation reset is not supported by calculation
|
| [SB-238] - Dialog - Timestamp - Having Dialog displayd increases X-size by approx. 90 pixels
|
| [SB-255] - Calculations - Remove calculations from selection -dialog, if data type of channel will not suport the calculation.
|
| [SB-274] - Import - Histogram of imported signal is not updated if afterwards another signal with the same name is imported.
|
| [SB-275] - Clock Dialog - Default clock adjustment is not part of the "quick-choice-list" (clock menü).
|
| [SB-277] - _Other - "User settings" dialog closes on certain action despite OK and Cancel button
|
| [SB-287] - _Other - Add download link to "Driver too old" dialog
|
| [SB-288] - _Other - Version numbering for setup files
|
| [SB-305] - _Other - Allow shared access to files opened by SBench6
|
| [SB-309] - _Other - generate new shortcut with "add shortcut" doesn't work (drag and drop the command work)
|
| [SB-317] - Dialog - Trigger - Use custom units and scale also in trigger dialogs
|
| [SB-360] - Calculations - Allow analog calculation not only check for length but also for the same type of source signals.
|
| Bugs
|
| [SB-34] - Display - At high zoom levels and high sampling rates x-axis repeats same value
|
| [SB-50] - Dialog - Clock - Change samplerate in acquisition loop: loop hangs or program crashes
|
| [SB-94] - _Other - Start two times SB6 with one card each out of two synchrnoized cards -> crash
|
| [SB-132] - Calculations - Program crash after some minutes runtime when using FFT
|
| [SB-135] - Display - Preview - Dialog asking to calculate preview data appears twice
|
| [SB-158] - Calculations - Calculations on histogram don't show correct x axis value
|
| [SB-163] - Dialog - Channel - Channel selection with STRG affects single selection (frame)
|
| [SB-168] - Display - Preview - Preview display contains old data after Windows->Close Displays
|
| [SB-172] - Calculations - Run in a loop and start/stop calculations sometimes leads to crash
|
| [SB-184] - Display - Histogram - Cursor B in histogram display does not show y value
|
| [SB-185] - Display - Analog - Cursors only visible in synced displays if activated after sync
|
| [SB-186] - Display - Analog - Channels imported from ASCII and SB5 file are not shown in display
|
| [SB-187] - Calculations - FFT with y scale in dBuV crashes if memsize >= 128k
|
| [SB-188] - _Other - Displayed transfer rate during fifo acquisition is wrong for 8bit and 16 bit cards
|
| [SB-189] - _Other - Linux 64 bit + MICX card, sometimes wrong data pointer address used if memory > 4GB
|
| [SB-193] - _Other - Problems at start with card-type MI.4032
|
| [SB-195] - Dialog - Clock - failure with ext. clock with divider
|
| [SB-197] - Dialog - Clock - Clock dialog failure while change settings in loop mode
|
| [SB-199] - Calculations - changing channel for a calculation while running in a loop
|
| [SB-200] - Import Export - Imported channels from WAVE files without additional header file do not show in display
|
| [SB-202] - Calculations - Calculation result in info dialog inverted
|
| [SB-204] - Import Export - Export of signals: current view has wrong positions
|
| [SB-206] - Calculations - False error message if issuing digital calculation on existing signals
|
| [SB-208] - _Other - Crash if user with at least three cards deselects StarHub carrrier card first and slave card afterwards
|
| [SB-210] - Calculations - Calculation reset call (context menu entry in info dialog) works only on root item
|
| [SB-212] - Import Export - Wrong amplitude of calculated signal after import
|
| [SB-213] - Import Export - Import of FFT signals does not work
|
| [SB-215] - _Other - Trouble with pull down menus while program run in loop mode
|
| [SB-216] - Dialog - Timestamp - MR + TS + RefClock: wrong time scaling
|
| [SB-217] - Dialog - Trigger - SB6 stops run in loop mode while switching (on/off) the trigger output @ X0/X1
|
| [SB-219] - _Other - RefClk timeout in timestamp dialog not restored at config load
|
| [SB-221] - _Other - Screenshot is not using the second color palette correctly
|
| [SB-222] - Display - Analog - Display during FIFO acquisition crashes with synced cards
|
| [SB-224] - Display - Analog - Prg. crash after Wave import, show complet signal and than zoom in.
|
| [SB-225] - _Other - Prg. crash at pressing the Default Button into the Engine-Settings Dialog.
|
| [SB-226] - _Other - Crash if screenshot is taken before first acquisition
|
| [SB-228] - Display - Analog - CLONE -Prg. crash after ASCII import, show complet signal and than zoom in.
|
| [SB-230] - Dialog - Info - Start without a board and import a data file: signal not visible
|
| [SB-231] - _Other - Crash if SBench6 is started without any card and file settings dialog is called.
|
| [SB-233] - Display - Histogram - Cursor into Histogram Display shows double of the y-value from the axis.
|
| [SB-236] - _Other - Wrong "not supported hardware" dialog
|
| [SB-240] - _Other - Full screen windows moves, when opening setup and retrieving negative screen coordinates
|
| [SB-243] - Import Export - Exported data file from base license can not be loaded by professional version.
|
| [SB-244] - Dialog - Channel - Right click on imported channels parent crashes SBench
|
| [SB-245] - Calculations - Updating imported data does not update derived calculation
|
| [SB-246] - _Other - After SB6 is closed, the "process" SB6 in taskmonitor don´t stop. No restart of SB6 possible til remove the process manually.
|
| [SB-247] - Dialog - Channel - Settings dialog for imported channels is empty if no card available
|
| [SB-248] - Calculations - Setting average to zero is allowed and crashes SBench
|
| [SB-252] - Import Export - Klick on time unit button in export dialog without valid data leads to application deadlock
|
| [SB-254] - Calculations - Invalid data warning when adding calculations missing when doing so on avereged channels
|
| [SB-256] - Calculations - Average Update should not be allowed to be greater than average count.
|
| [SB-257] - _Other - "SB6Eng: MemSetup: value in line 1 is out of range (0x00023102)"
|
| [SB-258] - Calculations - Input-Range offset is not used in calculations
|
| [SB-259] - Import Export - Importing pure binary files with a wave export header of same name crashes.
|
| [SB-260] - Import Export - Custom units are not saved when storing data in SBench6, wave and Binary format.
|
| [SB-262] - Display - Analog - Having cursor setting open and clicking in analog display crashes SBench.
|
| [SB-264] - Dialog - Channel - Deleting imported channels by pressing Delete key instead of using context menus moves remaining imported channels in hierarchy
|
| [SB-266] - Display - Analog - Imported data of a file containing single-channel data cannot be displayed
|
| [SB-267] - Display - Analog - Importing wave data ignores pre-trigger information and always starts at zero time.
|
| [SB-267] - Import Export - Importing wave data ignores pre-trigger information and always starts at zero time.
|
| [SB-268] - Display - Analog - Using "show full y signal" on imported and invalid data crashes Sbench
|
| [SB-268] - Import Export - Using "show full y signal" on imported and invalid data crashes Sbench
|
| [SB-269] - _Other - Flag for slow ABA timestamp also marks ref clk and BaseXIO
|
| [SB-270] - _Other - Custom unit of channels is not stored within config file.
|
| [SB-270] - Dialog - Channel - Custom unit of channels is not stored within config file.
|
| [SB-272] - Display - Analog - Imported sb6dat file: data not visible.
|
| [SB-272] - Import Export - Imported sb6dat file: data not visible.
|
| [SB-276] - Dialog - Mode - Timestamp "enable dialog on mode change" does not store permanent deactivation in settings and requires multiple negation on setup load.
|
| [SB-279] - _Other - Deleting all imported channels from one file does not close file
|
| [SB-279] - Dialog - Channel - Deleting all imported channels from one file does not close file
|
| [SB-280] - _Other - Channel specific settings are not stored in pure binary file
|
| [SB-282] - _Other - Board calibration ends with an error: SB calibration-dialog never recognize that
|
| [SB-283] - Dialog - Channel - SB6 doesn´t save histogram-allocations in config files
|
| [SB-284] - Display - Histogram - Vertical Zoom in the Histogram-Window ist limited -
|
| [SB-294] - _Other - Prg. crash after 10 minutes: std-rec with small memsize (two synced 46xx)
|
| [SB-299] - Display - Analog - Long channel names are cut in display's channel area
|
| [SB-299] - Display - Digital - Long channel names are cut in display's channel area
|
| [SB-299] - Display - FFT - Long channel names are cut in display's channel area
|
| [SB-299] - Display - Histogram - Long channel names are cut in display's channel area
|
| [SB-300] - Calculations - Histogram and FFT calculation crashes if first source channels are disabled
|
| [SB-301] - Calculations - First Histogram with more than one channel not displayed
|
| [SB-304] - Dialog - Mode - M2i.7005 does not start with default memory settings in 1 Bit mode
|
| [SB-306] - Calculations - Range in histogram is wrong for 46xx, 47xx
|
| [SB-310] - Display - Analog - Changing custom units/scales for channels with different input ranges can generate redundant y-axis
|
| [SB-312] - _Other - Program hanging if no trigger occurred.
|
| [SB-314] - Dialog - Trigger - SB6 crashes by clicking "Yes" in messagebox "no triggersource"
|
| [SB-315] - Display - Analog - Color of unit in the tooltip on axis for custom unit is wrong, if only the scale is different but the unit is identical.
|
| [SB-319] - Import Export - The extension ".sb6cfg" is necessary to open up config files by using keyboard.
|
| [SB-320] - Calculations - calculation frequency: calculation area = cursor: and cursor track: no value available after (left) cursor movement
|
| [SB-320] - Display - Analog - calculation frequency: calculation area = cursor: and cursor track: no value available after (left) cursor movement
|
| [SB-322] - Display - Analog - Renaming of a channel name does not immediately update the layout of the channel section of the display.
|
| [SB-323] - _Other - Interims PreCD Skript files need also to copy QtAssistantClient4.dll and QtNetwork4.dll
|
| [SB-325] - Dialog - Channel - Settings that are made over root items of the channel dialog (as Analog Inputs) do not work.
|
| [SB-327] - Import Export - When saving to wav or binary files preview size is told to be 0 MB. When using splitted files preview calculation crashes Sbench
|
| [SB-329] - _Other - After clicking cancel on save dialog on exit SBench6 can only be closed by termination from task manager
|
| [SB-331] - Calculations - Position for minimum and maximum calculation is wrong
|
| [SB-333] - _Other - Program crash at loading older config file.
|
| [SB-336] - _Other - Program close at loop-recording: program crash in SB6e
|
| [SB-337] - Dialog - Channel - SB6 crashes by switching (enable/disable) channels while running in loopmode
|
| [SB-338] - Display - Histogram - Atypical behavior of histogrammdisplay while using untypical mem allocation
|
| [SB-339] - Display - Analog - Changing directly between tooltips does not update background color from tooltip and makes it unreadable
|
| [SB-339] - Display - Digital - Changing directly between tooltips does not update background color from tooltip and makes it unreadable
|
| [SB-340] - Dialog - Trigger - Sb6 is able to run on channeltrigger although the button for this mode is switched off
|
| [SB-341] - Dialog - Trigger - Why the variation of measurement range have an influence on the triggerlevel-value at channel-trigger-mode ?
|
| [SB-342] - _Other - Check for maximum allowed channel trigger level is wrong
|
| [SB-343] - Dialog - Trigger - Changing the triggersource between analog-channels (Ch0, Ch1 ...) in loopmode have no consequence.
|
| [SB-344] - Help - Help for User Settings dialog is not up-to-date
|
| [SB-345] - Help - Help for "Common Setup Dialogs" not linked on index.html
|
| [SB-348] - _Other - Reading data smaller than 32k from Wave and Pure Binary files causes endless loop
|
| [SB-350] - Calculations - Output of an averaged FFT signal is a U(t) signal
|
| [SB-350] - Display - Analog - Output of an averaged FFT signal is a U(t) signal
|
| [SB-350] - Display - FFT - Output of an averaged FFT signal is a U(t) signal
|
| [SB-365] - Dialog - Channel - SBench crashes when doing an FFT on imported channel that is later deleted.
|
| [SB-367] - Calculations - Adding an average job with the same name to the same source twice results in one Av channel with double the averages.
|
| [SB-369] - Calculations - Creating an average calculation on a channel that never included valid data crashes application.
|
| [SB-370] - Calculations - Changing color of averaged FFT signal only takes effect on next start or on color change of source signal
|
| [SB-370] - Dialog - Channel - Changing color of averaged FFT signal only takes effect on next start or on color change of source signal
|
| [SB-370] - Display - Analog - Changing color of averaged FFT signal only takes effect on next start or on color change of source signal
|
| [SB-372] - _Other - Screenshot dialog does not save Clipboard/File setting
|
| [SB-373] - Display - Analog - Locked cursor B leaves signal if cursor tracking is enabled
|
| [SB-375] - Import Export - Crash if WAVE or PureBinary report read error in extra header |
| New Improvements
|
| [SB-7] - Digital Display: signal ordering
|
| [SB-14] - Display - Analog - Second color palette for display to easily change between display and print colors
|
| [SB-40] - MultipleRecording: "Pre-Trigger (Segment)" replace gray value "not used" through the calculated one: Segmentsize - Postsize
|
| [SB-54] - FIFO recording and Buttons "define zoom area" Cursor: other behavior as on standard recording
|
| [SB-64] - Dialog - Channel - Input paths on M3i cards with more meaningful names
|
| [SB-79] - Dialog - Trigger - Show selected channel/external source in dialog title when editing trigger settings:
|
| [SB-173] - Help - Main toolbar help menu entry to open SBench6 manual
|
| New Features
|
| [SB-65] - Dialog - Mode - Support for ABA mode for M2i/M3i acquisition cards
|
| Bugs
|
| [SB-5] - Sync Displays update after command
|
| [SB-6] - Sync-Displays: enable/disable update
|
| [SB-9] - Display - Preview - Crash when doing preview calculation without having data (after stop command)
|
| [SB-10] - Display - Analog - locked cursors are moving automatically on each update
|
| [SB-11] - Crash when dactivating channels that are used for a calculation
|
| [SB-12] - M3i no input signal after calibration
|
| [SB-13] - M3i external Reference clock not saved and minimum default value wrong
|
| [SB-15] - Only locked cursors do not follow zoom
|
| [SB-16] - Info for unlocked cursors flickering and not updated in "Loop" mode
|
| [SB-17] - Removing channel from analog display changes display of cursor lock status
|
| [SB-19] - Dragging a channel from dsplay and drop it at the same place removes it anyway
|
| [SB-24] - M3i Digital Inputs can be activated although triggering on X0
|
| [SB-25] - Changing trigger delay has no effect in loop mode
|
| [SB-33] - _Other - Demo card M2i.2121 + MR + GS + TS, SB6 Start -> SB6Eng: Mode Setup : value in line 0 is not allowed
|
| [SB-35] - Cursor jumps to the first visible sample if mouse is right of last sample
|
| [SB-36] - _Other - Data corruption in FIFO mode display. Display only, data itself is correctly
|
| [SB-37] - M3i.21xx maximum clock up/down buttons
|
| [SB-38] - Using of Triggerdelay results into program crash after recording.
|
| [SB-39] - M3i.21xx: Ext1/2 Output: Overrange not available at this family.
|
| [SB-41] - Program crash after half an hour at MR into recording loop.
|
| [SB-42] - Loading a user file for two screens on a one-screen machine makes dialogs on second screen inaccessible
|
| [SB-45] - FIFO recording: size > 1.4 MS: six second delay between recording-finished and start display painting
|
| [SB-47] - Enabling EXT0 trigger output does not uncheck source column
|
| [SB-48] - Error when selecting not the first one of multiple demo cards.
|
| [SB-49] - Crash when calculating histogram
|
| [SB-53] - Modifcation in File Settings Dialog has side effects: layout change and every time asking to overwrite file
|
| [SB-56] - FIFO mode: change of "Limit FIFO acquisition length" crash program
|
| [SB-61] - Display - Analog - Display: MaxADCValue from driver is ignorred by SBench --> wrong full scale
|
| [SB-62] - Display - Analog - Scaling of Digital Display has minimum window size
|
| [SB-63] - _Other - Saving and Restoring configuration when using toggle buttons doesn't bring back the state of the toggle button
|
| [SB-92] - Dialog - Channel - Crash when using multiple cards and disabling all channels of one middle card
|
| [SB-96] - Display - Preview - Preview signals too small
|
| [SB-98] - Dialog - Mode - Changing Pre-Trigger also changes the Memsize
|
| [SB-99] - Display - Analog - Corrupted display data when using interlace mode
|
| [SB-100] - Calculations - Crash if marking several calculation results
|
| [SB-103] - Display - Analog - Imported split files : Only the last added signal to analog display will be shown
|
| [SB-104] - Display - Analog - Split file zoom "Block not found" error
|
| [SB-105] - Import Export - Export failed if export data size is greater than 32 MBytes
|
| [SB-118] - Display - Digital - Up/Down scroll keys not working in digital display
|
| [SB-126] - _Other - Crash at preview calculation if only 1 segment in FIFO mode was recorded
|
| [SB-128] - _Other - Channel Setup: ghost columns when using digital inputs only
|
| [SB-129] - _Other - Changing clock and saving setup rate crashes SB6 on exit
|
| [SB-134] - Dialog - Clock - Interlace samplerate is not stored top config/reloaded from config correctly
|
| [SB-136] - Dialog - Trigger - Pattern trigger setup not accessible when source "Single" is selected
|
| [SB-137] - Calculations - Position for calculations like maximum is wrong for segmented channels
|
| [SB-141] - Calculations - wrong calculation: signal info at current view
|
| [SB-147] - Calculations - Position for simple calculations is off by one sample
|
| [SB-148] - Import Export - Wrong cached data block used if more than one .sb6dat file open
|
| [SB-150] - Dialog - Channel - Channel offset setting does not affect the position of the signal relative to the y-axis in the analog display.
|
| [SB-151] - _Other - FFT loop with calc: hangs after a few runs
|
| [SB-152] - Calculations - FFT Run with dynamic params: second run shows wrong results
|
| [SB-153] - _Other - Crash on combination with delete calc and load config
|
| [SB-162] - Display - Analog - Adding channels over context menu of display channel section will only allow to add channels with valid data
|
| [SB-174] - _Other - After FIFO acquisition some threads were waiting forever
|
| [SB-179] - Help - HTML documentation missing for absolute minimum/maximum calculations
|
| [SB-181] - Display - Locking Cursor A and B after each other does not check Lock A+B in menu
|
| [SB-182] - Display - Unlocking one cursor unlocked the other |
| New averaging function to average multiple signals
|
| Export of parts of signals possible
|
| Added additional harmonics display for FFT cursors.
|
| Added M2i.4740 and M2i.4741 support
|
| Added AND, OR, XOR calculation for digital channels
|
| Internal FIFO block size can now be set by user via engine settings
|
| Engine settings accessible for user
|
| Reworked dialog at program close: added cancel button, added "do not ask again" checkbox
|
| Set default external reference clock to 10MHz
|
| Updated help files
|
| Bug-Fix: Crash at close if cursor were active
|
| Bug-Fix: Dynamic parameter calculation crashed if more than one FFT channel was selected
|
| Bug-Fix: If data acquisition was interrupted before data had been transmitted, closing file caused endless wait
|
| Bug-Fix: Crash if no card in system
|
| Bug-Fix: File thread did not wait until all ABA/TS data were written to disk
|
| Bug-Fix: Busy waiting if data acquisition was interrupted
|
| Bug-Fix: Scrollbars were wrong after import of splitted file
|
| Bug-Fix: All default file names at import used .sb6dat ending
|
| Bug-Fix: Pure binary file import for 8 bit cards was wrong
|
| Bug-Fix: Export of file with preview data to file type that does not store preview data failed
|
| Bug-Fix: Exporting digital channels to ASCII, Wave, SB5 and pure binary crashed
|
| Bug-Fix: Error writing new digital data
|
| Bug-Fix: Setting external reference clock caused error for 46 and 47
|
| Bug-Fix Linux: Program crash on file open on ext4 file system
|
| Bug-Fix: Export of digital channels crashed
|
| Bug-Fix: ASCII export ignored settings
|
| Bug-Fix: Wave file import crashed
|
| Bug-Fix: Version string of resource file corrected
|
| Bug-Fix: Bestfit zoom button disabled when using spread axis y function
|
| Bug-Fix: Setting a channel in AND and OR trigger mask caused driver error
|
| Bug-Fix: Card kept on triggering after user disabled single external trigger
|
| Bug-Fix: Trigger output did not work in single trigger mode because external trigger mode was not NONE
|
| Bug-Fix: Slave clock could be set to value higher than master clock
|
| Bug-Fix: Replaced corner label in clock dialog with tool tip
|
| Bug-Fix: Dynamic parameter calculation crashed at second call
|
| Bug-Fix: Calculations on cursor area crashed if cursor was disabled
|
| Bug-Fix: A previous change caused crash if cursors were enabled before a valid signal was available
|
| Bug-Fix: In loop mode screen did not update locked cursors
|
| Bug-Fix: Initial memory settings for synced cards without individual setup were wrong
|
| Bug-Fix: TileVertical/Horizontal created small unused areas
|
| Bug-Fix: In zoom settings without a sample on the left display border no line connected the first visible sample with the last invisible
|
| Bug-Fix: Cursors in digital display were wrong if display had been scrolled |
| Support of MI, MC, MX data acquisition cards
|
| New calculation implemented: Sinus Info
|
| Spread signal display added to show all channels one above the other
|
| Cursor track function implemented (difference between cursor A and B stays fixed)
|
| Setup of channel colors and custom units can now be done for multiple channels at the same time.
|
| Saving behavior for user file when leaving SBench 6 is now selectable within user settings dialog
|
| Default Layout, Shortcuts, Iconbars automatically used if no user settings file found
|
| Software checks trigger setup more deeply
|
| Start loop button can now be used for stop also if loop is running
|
| Export of digital channels added
|
| Pretrigger also available for standard acquisition mod
|
| Mem, Segment, Pre and Post automatically adjusted if values does not fit
|
| New context menu entries for calculated signals to restart calculation and to add/remove signal from loop calculation
|
| Histogram can now switch between point and line display
|
| Trigger mode now switch automatically to Single Trigger if channel or extern trigger is selected in trigger dialog
|
| Clock and Trigger settings updated in loop mode even if card is waiting for trigger event or no reference clock is attached
|
| Channels can now be enabled/disabled by double click on the channel icon in the channel dialog
|
| Calculation info item states like item hidden or expanded are now stored in config file
|
| Added new screenshot formats: tif, ppm, xpm, xbm
|
| Cursor mode, zoom mode and reset mode now accessible by display context menu
|
| Bug-Fix: memory leak in FFT calculation
|
| Bug-Fix: zoom of calculated signals caused wrong zoom levels
|
| Bug-Fix: auto trigger time wasn't stored in config file
|
| Bug-Fix: sometimes wrong Trigger levels settings within channel trigger dialog
|
| Bug-Fix: missing trigger modes added to trigger info display
|
| Bug-Fix: crash if no card was found
|
| Bug-Fix: num cycles was wrong
|
| Bug-Fix: removed GIF export option as this doesn't run and
|
| Bug-Fix: memory combo boxes showed wrong value if value was bigger than 1024k but not dividable by 1024
|
| Bug-Fix: preview display was wrong if synced card had different post/memsize ratios
|
| Bug-Fix: calculations from config file were not restored.
|
| Bug-Fix: disabling only channel in FFT and enabling other channel kept FFT job running
|
| Bug-Fix: digital display crashed if user changed channels
|
| Bug-Fix: digital display did not show data for 7005's bit modes
|
| Bug-Fix: export dialog's abort button closed dialog but did not abort export job
|
| Bug-Fix: some settings did not get restored from sb6cfg file
|
| Bug-Fix: DI card in FIFO mode caused crash
|
| Bug-Fix: available trigger modes depend on selected acquisition mode
|
| Bug-Fix: available triggers in gated sampling mode were wrong
|
| Bug-Fix: activating external clock for 47xx caused error
|
| Bug-Fix: dynamic parameter calculation could crash if position of fundamental was smaller than bin size
|
| Bug-Fix: SB6 ran into deadlock if user opened calculation settings for FFT during continuous acquisition
|
| Bug-Fix: crash in histogram with 16 bit cards
|
| Bug-Fix: Display shrunk if display color dialog was canceled and display was maximized
|
| Bug-Fix: Digital display context menu was not shown
|
| Bug-Fix: Crash if FFT calculation gets out off memory and the FFT channel already exists from prior calculations
|
| Bug-Fix: Display context menu and zoom area cursor problems under Linux fixed
|
| Bug-Fix: crash if user closed preview display while digital cursors were locked
|
| Bug-Fix: Y-axis constantly changed when using bestfitY zoom in loop mode
|
| Bug-Fix: Division by zero error if tileH or tileV was called and no displays were available |
| Help files added, help text reworked
|
| Automatic file split in defined size implemented
|
| Wave file export and import added
|
| Pure binary file export and import added
|
| ASCII export and import added
|
| Continuous streaming directly into different binary file formats possible: SBench6, Pure Binary and Wave
|
| Display synchronization added: zoom level and cursor positions can be linked
|
| Toolbars can be edited then, setup stored in config user files
|
| sb6.ini and sb6lay combined to user settinsg file sb6usr. New file contains all toolbar, key shortcuts and windo layout information
|
| Installer now automatically links to SBench6 files (*.sb6dat, *.sb6cfg, *.sb6usr)
|
| M2i.70xx series: Digital Pattern trigger implemented
|
| New tile functions: tile horizontally and vertically
|
| New zoom functions: "best fit X" and "best fit Y" direction
|
| Trigger delay can now be set with modifier k, M, G
|
| Colors of calculated channels now stored to config file
|
| Extended status display for FIFO mode showing transferred data, time and average speed
|
| File settings grouped in one dialog and improved
|
| No more result flickering if using locked cursors
|
| Added history mode for digital displays
|
| Calculation results now have a defined precision
|
| Painting of preview cursors enhanced
|
| Screenshot settings stored into setup file
|
| New calculation: Absolute min/max/peak-peak added
|
| Context menues for displays added
|
| Color settings for displays available
|
| Pressing shift at startup screen avoids to load config file specified at program parameters
|
| Bug-Fix: averaging for cycled calculations wasn't working properly
|
| Bug-Fix: crash under Linux when running into a driver error
|
| Bug-Fix: multiple recording + FIFO mode: segment size couldn't be programmed
|
| Bug-Fix: screen shot utility crashed
|
| Bug-Fix: FIFO + synchronized cards with digital channels caused data error
|
| Bug-Fix: Ctrl-C to copy measurement results only copied the current one and not all marked results
|
| Bug-Fix: FFT dynamic paramters calculation took DC level as carrier if DC was higher than carrier frequency
|
| Bug-Fix: cursor locking for digital displays was missing
|
| Bug-Fix: changing working directorty did not change location of temporary files
|
| Bug-Fix: seldom program crash at shutdown
|
| Bug-Fix: data retrieval after overrun could not be stopped
|
| Bug-Fix: FFT display undo not working
|
| Bug-Fix: calculation stop and restart didn't work
|
| Bug-Fix: segment combo box was disabled in Multi modes if user selected single FIFO mode before
|
| Bug-Fix: post size is now adjusted to correct value if too large
|
| Bug-Fix: no software trigger for multi modes available
|
| Bug-Fix: synchronized cards: editing slave clock was reset afetrr leacing edit window
|
| Bug-Fix: if file channel was deleetd from system all calcualtions on this couldn't be deleted any more
|
| Bug-Fix: after FIFO overrun there was sometimes a driver error message shown
|
| Bug-Fix: overwriting setup file caused digital channels to double
|
| Bug-Fix: export channel seletcion also allowed invalid channels to be taken
|
| Bug-Fix: offset of histogram and FFT displays was calculated wrong
|
| Bug-Fix: crash if zooming histogram display with active cursors
|
| Bug-Fix: SFDR and SNR calculated wrong if memsize > 64k
|
| Bug-Fix: engine error if A/D card contained more than 16 digital channels
|
| Bug-Fix: function clear workign directory now also removes binary, wave, matlab, screenshot and ASCII files also
|
| Bug-Fix: pressing TAB key lost the individual memory settings on multipel cards
|
| Bug-Fix: key shortcuts didn't work for FFT and histogram display
|
| Bug-Fix: channel trigger levels: delta was calculated wrong
|
| Bug-Fix: obsolete iinternal debug messages shown under Linux
|
| Bug-Fix: program crash if only one digital channel was activated on M3i series
|
| Bug-Fix: program hangs if changing loop status of calculation
|
| Bug-Fix: file settings: file name was changed even if pressing abort
|
| Bug-Fix: trigger position was not shown correctly if using trigger delay
|
| Bug-Fix: crash in FFT calculation if using more than one channel and memsize > 128k
|
| Bug-Fix: clock settings sometimes allow wrong setup if changing channel enable |
