- 8 bit arbitrary waveform generator
- 2 synchronous channels with seperate D/A
- Maximum output rate 125 MS/s on 2 channels
- Synchronous output on all channels
- Fast 8 Bit arbitrary waveform generator
- Output level up to ±3 V in 50 Ohm
- Amplifier module with ±10 V output level as an option
- Offset and amplitude software programmable
- Up to 128 MSample memory
- Continuous FIFO mode
- 32 Bit PXI / CompactPCI 3U interface
- Compatible with 3,3V and 5V PCI I/O-Voltage
- Software SPEasyGenerator included
MX.61xx FamilyWith the PXI board MX.6110 it is possible to generate free definable waveforms on two channels synchronously. The board works on channels with a synchronous samplerate of 125 MS/s. The internal standard Sync-bus allows the setup of synchronous multi channel systems with higher channel numbers. It is also possible to combine the arbitrary waveform generator with other boards of the MX product family like analogue or digital acquisition boards. With the up to 128 MSample large on-board memory long waveform could be generated even with high samplerates. The memory could also be used as a FIFO buffer to make continuous data transfer from PC memory or hard disk. Model | 1 channel | 2 channels | | 125 MS/s | 125 MS/s |
Block diagram
Memory | FIFO Mode: continous data transfer up to 100 MB/s [ more...] |
| Singleshot Output: The programmed memory is generated one time |
| Continous Output: After trigger event the programmed memory is generated continuously in a loop |
| Standard memory 16 MSamples |
| Option memory upgrade to 32 MS, 64 MS or 128 MS on-board memory |
Trigger | External Trigger: Input or output of external TTL signal [ more...] |
| Option Multiple Replay: Output of several segments with short dead-time [ more...] |
| Option Gated Replay: Replay controlled by gate signal [ more...] |
Clock | External Clock: Input or output of sampling clock [ more...] |
| Reference Clock: Used to generate sampling clock [ more...] |
PXI BusThe PXI bus extension offers a lot of pre-defined lines on the backplane for clock and trigger synchronisation between different boards.
The Spectrum card supports these PXI features: | 10 MHz Reference Clock: Could be used as base for samplerate generation |
| Star Trigger: supported as trigger source for the board |
| Trigger Bus: Direct card synchronisation with the integrated trigger bus |
Extras | ±10 V Amplifier: Extra board with ±10 V output levels and 1, 2 or 4 channels [ more...] |
Software Support | Standard drivers for Windows and Linux as well as examples for C/C++, Delphi and Basic are included in the delivery [ more...] |
| SBench: Comfortable measurement software for windows [ more...] |
| Option LabVIEW drivers: Libraries and examples for LabVIEW[ more...] |
| Option DASYLab driver: Direct access to cards with DASYLab [ more...] |
| Option MATLAB driver: Universal driver for all cards [ more...] |
| Option VEE driver: Libraries and examples for Agilent VEE [ more...] |
DownloadsApplication Notes
|
