- 12 bit transient recorder
- 2 synchronous channels with seperate A/D
- 50 MS/s on 2 channels
- 100 MS/s on one channel
- Fastest 12 bit A/D board
- Simultanous sampling on all channels
- Up to 64 MSample memory
- 6 input ranges between ±200 mV and ±10 V
- FIFO mode up to 50 MS/s sum samplerate
- Input offset up to ±100%
- Automatic offset calibration
- Synchronisation to multi-board system possible
- 32 Bit PXI / CompactPCI 3U interface
- Compatible with 3,3V and 5V PCI I/O-Voltage
MX.30xx FamilyThe MX.30xx series offer a wide range of very fast 12 bit A/D converter boards for PXI bus. Due to the well-planned design these boards are available in several versions and different speed grades. That makes it possible for the user to find a indi-vidual solution.
These boards offer one or two channels with a maximum sampling rate of 100 MS/s. As an option 4 digital inputs per channel could be recorded synchronously. The installed memory of up to 64 MSample will be used for fast data recording. It can completely be used by the currently active channels. If using slower sampling rates the memory is switched to a FIFO buffer and data will be transferred online to the PC memory or to hard disk.
Several boards of the MX.xxxx series may be connected together by the internal standard synchronisation bus to work with the same time base. Model | 1 channel | 2 channels | | 80 MS/s | | | 40 MS/s | 40 MS/s | | 80 MS/s | 40 MS/s | | 100 MS/s | | | 50 MS/s | 50 MS/s | | 100 MS/s | 50 MS/s | | 60 MS/s | 60 MS/s |
Block diagram
Memory | FIFO Mode: continous data transfer up to 100 MB/s [ more...] |
| Ringbuffer: Recording with Pre- and Posttrigger [ more...] |
| Standard memory 8 MSamples |
| Option memory upgrade to 16 MS, 32 MS or 64 MS on-board memory |
Trigger | Channel Trigger: Recognition of level and edge [ more...] |
| Window Trigger: Trigger at window enter or leave [ more...] |
| Pulsewidth Trigger: Trigger on defined pulsewidth [ more...] |
| OR Conjunction: Several trigger sources are or'd [ more...] |
| Steepness trigger between two levels [ more...] |
| External Trigger: Input or output of external TTL signal [ more...] |
| Option Multiple Recording: Recording of trigger events with high repetition rates and very small dead time [ more...] |
| Option Gated Sampling: Recording controlled by gate signal [ more...] |
Clock | External Clock: Input or output of sampling clock [ more...] |
| Reference Clock: Used to generate sampling clock [ more...] |
PXI BusThe PXI bus extension offers a lot of pre-defined lines on the backplane for clock and trigger synchronisation between different boards.
The Spectrum card supports these PXI features: | 10 MHz Reference Clock: Could be used as base for samplerate generation |
| Star Trigger: supported as trigger source for the board |
| Trigger Bus: Direct card synchronisation with the integrated trigger bus |
Software Support | Standard drivers for Windows and Linux as well as examples for C/C++, Delphi and Basic are included in the delivery [ more...] |
| Firmware update in the Spectrum Control Center[ more...] |
| SBench: Comfortable measurement software for windows [ more...] |
| SPviewIT: comfortable and fast hard disk streaming software for Windows [ mehr...] |
| Option LabVIEW drivers: Libraries and examples for LabVIEW[ more...] |
| Option DASYLab driver: Direct access to cards with DASYLab [ more...] |
| Option MATLAB driver: Universal driver for all cards [ more...] |
| Option VEE driver: Libraries and examples for Agilent VEE [ more...] |
DownloadsApplication Notes
|
