Spectrum-Instrumentation: MI.7211 - 32 Bit Pattern Generator with programmable Levels



	Click picture to enlarge

Pattern generator with programmable levels

32 bit data width at 5 MS/s

16 bit data width at 10 MS/s

1 PCI slot without additional power supply

High and low level programmable to -2 V up to +10 V

Level individually for each 4 bit programmable

Outputs can be individually disabled

Differntial outputs in hardware

Capable of driving 110 ohm termination

Up to 512 MByte on-board memory

Continuous FIFO mode

32 Bit PCI interface

M2i - new generation of PC instruments

The new M2i card series generation is the successor of the former MI series. The M2i series offers some outstanding features:

	Completely new developed base card
	4 GByte memory with one slot width
	Optimized low jitter clock section
	Multi, Gate, ABA with programmable pre, posttrigger and timestamp
	Zero phase delay synchronization
	AND/OR conjunction of trigger/gate

Please click on one of the following links to get detailed information on the sucessor cards of the M2i series: M2i.7210, M2i.7211, M2i.7220, M2i.7221

MI.72xx Family

The MI.72xx pattern generator series gives the user the possibility to generate digital data with a wide range of output levels. For every 4 bit the LOW and HIGH levels can be programmed from -2.0 V up to +10.0 V. Even at high speeds you are not limited concerning the maximum output swing. This enables the user to drive devices of nearly any logic family, like ECL, PECL, TTL, LVDS, LVTTL, CMOS or LVCMOS. The potentially necessary differential signals are generated in hardware, so that only one data bit is used for each pair of differential signals.

All outputs can be separately disabled allowing the easy connection with digital acquisition boards and the adaption to a wide range of test setups. The internal standard synchronisation bus allows synchronisation of several MI.xxxx boards. Therefore the MI.72xx board could be used as an enlargement to any digital or analog board.