- Universal digital I/O
- 32 bit data width at 125 MS/s
- 64 bit data width at 60 MS/s
- Configured for input and output
- 110 Ohm termination software selectable
- 3,3V and 5V TTL tolerant I/O lines
- Up to 512 MByte on-board memory
- continuous FIFO transfer possible
- Pattern edge pulsewidth trigger
- internal synchronisation with analog cards possible
- 32 Bit PCI Interface
- Compatible with 3,3V and 5V PCI I/O-Voltage
M2i - new generation of PC instrumentsThe new M2i card series generation is the successor of the former MI series. The M2i series offers some outstanding features:  | Completely new developed base card
| | 4 GByte memory with one slot width
| | Optimized low jitter clock section
| | Multi, Gate, ABA with programmable pre, posttrigger and timestamp
| | Zero phase delay synchronization
| | AND/OR conjunction of trigger/gate |
Please click on one of the following links to get detailed information on the sucessor cards of the M2i series M2i.7005, M2i.7010, M2i.7011, M2i.7020, M2i.7021 
MI.70xx FamilyThe MI.70xx series of fast digital I/O boards offer a resolution between 16 bit and 64 bit with a maximum sampling rate of 125 MS/s (60 MS/s). Every 16 bit / 32 bit of the board could be separately programmed for input or output. The on-board memory of up to 512 MByte could be used completely for recording or replaying digital data. Alternatively the MI.70xx could be used in FIFO mode. Then data is transferred on-line to PC memory or hard disk. The internal standard synchronisation bus allows synchronisation of several MI.xxxx boards. Therefore the MI.70xx board could be used as an enlargement to analogue boards. Name | 1-4 Bit | 8 Bit | 16 Bit | 32 Bit | 64 Bit | | 125 MS/s | 125 MS/s | 125 MS/s | | | | | 125 MS/s | 125 MS/s | | | | | 125 MS/s | 125 MS/s | 60 MS/s | | | | 125 MS/s | 125 MS/s | 125 MS/s | | | | 125 MS/s | 125 MS/s | 125 MS/s | 60 MS/s |
Block diagram
Memory | FIFO Mode: continous data transfer up to 100 MB/s [ more...] |
| Singleshot Output: The programmed memory is generated one time |
| Continous Output: After trigger event the programmed memory is generated continuously in a loop |
| Standard memory 16 MSamples |
| Option memory upgrade to 32 MS, 64 MS, 128 MS, 256 MS or 512 MS on-board memory |
Trigger | External Trigger: Input or output of external TTL signal [ more...] |
| Pulsewidth Trigger: Trigger on defined pulsewidth [ more...] |
| Option Multiple Recording: Recording of trigger events with high repetition rates and very small dead time [ more...] |
| Option Multiple Replay: Output of several segments with short dead-time [ more...] |
| Option Gated Sampling: Recording controlled by gate signal [ more...] |
| Option Gated Replay: Replay controlled by gate signal [ more...] |
| Option Timestamp: Time stamping of trigger events [ more...] |
Clock | External Clock: Input or output of sampling clock [ more...] |
| Reference Clock: Used to generate sampling clock [ more...] |
Extras | Option Synchronisation: Direct synchronisation of up to 4 cards [ more...] |
| Option Star-Hub: Synhronisation of up to 16 cards without phase delay [ more...] |
| Option Extra I/O: 24 digital I/O + 4 analog outputs [ more...] |
Software Support | Standard drivers for Windows and Linux as well as examples for C/C++, Delphi and Basic are included in the delivery [ more...] |
| SBench: Comfortable measurement software for windows [ more...] |
| Option LabVIEW drivers: Libraries and examples for LabVIEW[ more...] |
| Option DASYLab driver: Direct access to cards with DASYLab [ more...] |
| Option MATLAB driver: Universal driver for all cards [ more...] |
| Option VEE driver: Libraries and examples for Agilent VEE [ more...] |
DownloadsApplication Notes
|
