- 14 bit arbitrary waveform generator
- 4 synchronous channels with seperate D/A
- Maximum output rate 60 MS/s on 4 channels
- Maximum output rate 125 MS/s on 2 channels
- Output up to ±3 V in 50 Ohm
- Amplifier module with ±10 V output level as an option
- Programmable Offset and Amplitude
- Up to 256 MSample memory
- Continuous FIFO mode
- 32 Bit PCI interface
- Compatible with 3,3V and 5V PCI I/O-Voltage
- Software SPEasyGenerator included
M2i - new generation of PC instrumentsThe new M2i card series generation is the successor of the former MI series. The M2i series offers some outstanding features:  | Completely new developed base card
| | 4 GByte memory with one slot width
| | Optimized low jitter clock section
| | Multi, Gate, ABA with programmable pre, posttrigger and timestamp
| | Zero phase delay synchronization
| | AND/OR conjunction of trigger/gate |
Please click on one of the following links to get detailed information on the sucessor cards of the M2i series: M2i.6011, M2i.6012, M2i.6021, M2i.6022, M2i.6030, M2i.6031, M2i.6033, M2i.6034 
MI.60xx FamilyThe MI.60xx series offer 8 different versions of arbitrary waveform generators for the PCI bus. With these boards it is possible to generate free definable waveforms on several channels synchronously. There are up to four channels on one board with a maximum sampling rates of 125 MS/s. The internal standard Syncbus allows the setup of synchronous multi channel systems with higher channel numbers. It is also possible to combine the arbitrary waveform generator with other boards of the MI product family like analogue or digital acquisition boards. With the up to 256 MSample large on-board memory long waveforms could be generated even with high sampling rates. The memory could also be used as a FIFO buffer to make continuously data transfer from PC memory or hard disk. Model | 1 channel | 2 channels | 4 channels | | 20 MS/s | 20 MS/s | | | 20 MS/s | 20 MS/s | 20 MS/s | | 60 MS/s | 60 MS/s | | | 60 MS/s | 60 MS/s | 60 MS/s | | 125 MS/s | | | | 125 MS/s | 125 MS/s | | | 125 MS/s | 60 MS/s | | | 125 MS/s | 125 MS/s | 60 MS/s |
Block diagram
Memory | FIFO Mode: continous data transfer up to 100 MB/s [ more...] |
| Singleshot Output: The programmed memory is generated one time |
| Continous Output: After trigger event the programmed memory is generated continuously in a loop |
| Standard memory 8 MSamples |
| Option memory upgrade to 16 MS, 32 MS, 64 MS, 128 MS or 256 MS on-board memory |
Trigger | External Trigger: Input or output of external TTL signal [ more...] |
| Option Multiple Replay: Output of several segments with short dead-time [ more...] |
| Option Gated Replay: Replay controlled by gate signal [ more...] |
Clock | External Clock: Input or output of sampling clock [ more...] |
| Reference Clock: Used to generate sampling clock [ more...] |
Extras | Option Synchronisation: Direct synchronisation of up to 4 cards [ more...] |
| Option Star-Hub: Synhronisation of up to 16 cards without phase delay [ more...] |
| Option Extra I/O: 24 digital I/O + 4 analog outputs [ more...] |
| ±10 V Amplifier: Extra board with ±10 V output levels and 1, 2 or 4 channels [ more...] |
| Bank Switching: Output of two signals controlled by bank signals [ mehr...] |
Software Support | Standard drivers for Windows and Linux as well as examples for C/C++, Delphi and Basic are included in the delivery [ more...] |
| SBench: Comfortable measurement software for windows [ more...] |
| Option LabVIEW drivers: Libraries and examples for LabVIEW[ more...] |
| Option DASYLab driver: Direct access to cards with DASYLab [ more...] |
| Option MATLAB driver: Universal driver for all cards [ more...] |
| Option VEE driver: Libraries and examples for Agilent VEE [ more...] |
DownloadsApplication Notes
|
