- 12 bit transient recorder
- 4 synchronous channels with seperate A/D
- 50 MS/s on 4 channels
- Up to 256 MSample memory
- 6 input ranges between ±200 mV and ±10 V
- FIFO mode up to 50 MS/s sum samplerate
- Input offset up to ±100%
- Automatic offset calibration
- Synchronisation to multi-board system possible
- 32 Bit PCI interface
- Compatible with 3,3V and 5V PCI I/O-Voltage
M2i - new generation of PC instrumentsThe new M2i card series generation is the successor of the former MI series. The M2i series offers some outstanding features:  | Completely new developed base card
| | 4 GByte memory with one slot width
| | Optimized low jitter clock section
| | Multi, Gate, ABA with programmable pre, posttrigger and timestamp
| | Zero phase delay synchronization
| | AND/OR conjunction of trigger/gate |
Please click on one of the following links to get detailed information on the sucessor cards of the M2i series: M2I.3010, M2I.3011, M2I.3012, M2I.3013, M2I.3014, M2I.3015, M2I.3016, M2I.3020, M2I.3021, M2I.3022, M2I.3023, M2I.3024, M2I.3025, M2I.3026, M2I.3027, M2I.3031, M2I.3033 
MI.30xx FamilyThe MI.30xx series offer a wide range of very fast 12 bit A/D converter boards for PCI bus. Due to the well-planned design these boards are available in several versions and different speed grades. That makes it possible for the user to find a individual solution.
These boards offer one to four channels with a maximum sampling rate of 200 MS/s. As an option 4 digital inputs per channel could be recorded synchronously. The installed memory of up to 256 MSample will be used for fast data recording. It can completely be used by the currently active channels. If using slower sampling rates the memory is switched to a FIFO buffer and data will be transferred online to the PC memory or to hard disk.
Several boards of the MI.xxxx series may be connected together by the internal standard synchronisation bus to work with the same time base. Model | 1 channel | 2 channels | 4 channels | | 80 MS/s | | | | 40 MS/s | 40 MS/s | | | 80 MS/s | 40 MS/s | | | 40 MS/s | 40 MS/s | 40 MS/s | | 80 MS/s | 80 MS/s | 40 MS/s | | 160 MS/s | 80 MS/s | | | 160 MS/s | 80 MS/s | 40 MS/s | | 100 MS/s | | | | 50 MS/s | 50 MS/s | | | 100 MS/s | 50 MS/s | | | 50 MS/s | 50 MS/s | 50 MS/s | | 100 MS/s | 100 MS/s | 50 MS/s | | 200 MS/s | 100 MS/s | | | 200 MS/s | 100 MS/s | 50 MS/s | | 100 MS/s | 100 MS/s | | | 60 MS/s | 60 MS/s | | | 60 MS/s | 60 MS/s | 60 MS/s |
Block diagram
Memory | FIFO Mode: continous data transfer up to 100 MB/s [ more...] |
| Ringbuffer: Recording with Pre- and Posttrigger [ more...] |
| Standard memory 8 MSamples |
| Option memory upgrade to 16 MS, 32 MS, 64 MS, 128 MS or 256 MS on-board memory |
Trigger | Channel Trigger: Recognition of level and edge [ more...] |
| Window Trigger: Trigger at window enter or leave [ more...] |
| Pulsewidth Trigger: Trigger on defined pulsewidth [ more...] |
| OR Conjunction: Several trigger sources are or'd [ more...] |
| Steepness trigger between two levels [ more...] |
| External Trigger: Input or output of external TTL signal [ more...] |
| Option Multiple Recording: Recording of trigger events with high repetition rates and very small dead time [ more...] |
| Option Gated Sampling: Recording controlled by gate signal [ more...] |
| Option Timestamp: Time stamping of trigger events [ more...] |
Clock | External Clock: Input or output of sampling clock [ more...] |
| Reference Clock: Used to generate sampling clock [ more...] |
Extras | Option Synchronisation: Direct synchronisation of up to 4 cards [ more...] |
| Option Star-Hub: Synhronisation of up to 16 cards without phase delay [ more...] |
| Option Extra I/O: 24 digital I/O + 4 analog outputs [ more...] |
| Option Digital Inputs: Additional 4 synchronous digital inputs per analog channel [ more...] |
Software Support | Standard drivers for Windows and Linux as well as examples for C/C++, Delphi and Basic are included in the delivery [ more...] |
| Firmware update in the Spectrum Control Center[ more...] |
| SBench 5: Comfortable measurement software for windows [ more...] |
| Option LabVIEW drivers: Libraries and examples for LabVIEW[ more...] |
| Option DASYLab driver: Direct access to cards with DASYLab [ more...] |
| Option MATLAB driver: Universal driver for all cards [ more...] |
| Option VEE driver: Libraries and examples for Agilent VEE [ more...] |
DownloadsApplication Notes
|
