- 8 bit arbitrary waveform generator
- 4 synchronous channels with seperate D/A
- Maximum output rate 125 MS/s on 4 channels
- Synchronous output on all channels
- Fast 8 Bit arbitrary waveform generator
- Output level up to ±3 V in 50 Ohm
- Amplifier module with ±10 V output level as an option
- Offset and amplitude software programmable
- Up to 512 MSample memory
- Continuous FIFO mode
- 32 Bit CompactPCI 6U interface
- Compatible with 3,3V and 5V PCI I/O-Voltage
- Software SPEasyGenerator included
MC.61xx FamilyThe MC.61xx series offer two different versions of arbitrary waveform generators for the CompactPCI bus. With these boards it is possible to generate free definable waveforms on several channels synchronously. There are two or four channels on one board with a synchronous sampling rate of 125 MS/s. The internal standard Sync-bus allows the setup of synchronous multi channel systems with higher channel numbers. It is also possible to combine the arbitrary waveform generator with other boards of the MC product family like analogue or digital acquisition boards. With the up to 512 MSample large on-board memory long waveforms could be generated even with high sampling rates. The memory could also be used as a FIFO buffer to make continuously data transfer from PC memory or hard disk. Model | 1 channel | 2 channels | 4 channels | | 125 MS/s | 125 MS/s | | | 125 MS/s | 125 MS/s | 125 MS/s |
Block diagram
Memory | FIFO Mode: continous data transfer up to 100 MB/s [ more...] |
| Singleshot Output: The programmed memory is generated one time |
| Continous Output: After trigger event the programmed memory is generated continuously in a loop |
| Standard memory 16 MSamples |
| Option memory upgrade to 32 MS, 64 MS, 128 MS, 256 MS or 512 MS on-board memory |
Trigger | External Trigger: Input or output of external TTL signal [ more...] |
| Option Multiple Replay: Output of several segments with short dead-time [ more...] |
| Option Gated Replay: Replay controlled by gate signal [ more...] |
Clock | External Clock: Input or output of sampling clock [ more...] |
| Reference Clock: Used to generate sampling clock [ more...] |
Extras | Option Synchronisation: Direct synchronisation of up to 4 cards [ more...] |
| Option Star-Hub: Synhronisation of up to 16 cards without phase delay [ more...] |
| Option Extra I/O: 24 digital I/O + 4 analog outputs [ more...] |
| ±10 V Amplifier: Extra board with ±10 V output levels and 1, 2 or 4 channels [ more...] |
Software Support | Standard drivers for Windows and Linux as well as examples for C/C++, Delphi and Basic are included in the delivery [ more...] |
| SBench: Comfortable measurement software for windows [ more...] |
| Option LabVIEW drivers: Libraries and examples for LabVIEW[ more...] |
| Option DASYLab driver: Direct access to cards with DASYLab [ more...] |
| Option MATLAB driver: Universal driver for all cards [ more...] |
| Option VEE driver: Libraries and examples for Agilent VEE [ more...] |
DownloadsApplication Notes
|
