- 16 bit A/D converter board
- 2 synchronous channels with seperate A/D
- Maximum sampling rate 200 kS/s on 2 channels
- Extremely high dynamic range
- Up to 256 MSample memory
- 4 input ranges between ±1 V and ±10 V
- Continuous FIFO mode
- Input offset up to ±100%
- Automatic offset calibration
- Selectable single-ended or differential inputs
- Synchronisation to multi-board system possible
- 32 Bit CompactPCI 6U interface
- Compatible with 3,3V and 5V PCI I/O-Voltage
MC.45xx FamilyThe MC.45xx for the first time offers full 16 bit resolution synchronously on all channels at very high sampling rates. Every channel has its own amplifier and A/D converter. This eliminates the problems known from multiplexed systems like phase error between the channels or high crosstalk. Every input channel could be offset calibrated using the software. The user will find easily a matching solution from the six offered models. These versions are working with sampling rates of 200 kS/s, 500 kS/s or 1 MS/s. The boards have two or four channels and could also be updated to a multichannel system using the internal synchronization bus. Model | 1 channel | 2 channels | 4 channels | | 200 kS/s | 200 kS/s | | | 200 kS/s | 200 kS/s | 200 kS/s | | 500 kS/s | 500 kS/s | | | 500 kS/s | 500 kS/s | 500 kS/s | | 1 MS/s | 1 MS/s | | | 1 MS/s | 1 MS/s | 1 MS/s |
Block diagram
Memory | FIFO Mode: continous data transfer up to 100 MB/s [ more...] |
| Ringbuffer: Recording with Pre- and Posttrigger [ more...] |
| Standard memory 8 MSamples |
| Option memory upgrade to 16 MS, 32 MS, 64 MS, 128 MS or 256 MS on-board memory |
Trigger | Channel Trigger: Recognition of level and edge [ more...] |
| Window Trigger: Trigger at window enter or leave [ more...] |
| Pulsewidth Trigger: Trigger on defined pulsewidth [ more...] |
| OR Conjunction: Several trigger sources are or'd [ more...] |
| Steepness trigger between two levels [ more...] |
| External Trigger: Input or output of external TTL signal [ more...] |
| Option Multiple Recording: Recording of trigger events with high repetition rates and very small dead time [ more...] |
| Option Gated Sampling: Recording controlled by gate signal [ more...] |
| Option Timestamp: Time stamping of trigger events [ more...] |
Clock | External Clock: Input or output of sampling clock [ more...] |
| Reference Clock: Used to generate sampling clock [ more...] |
Extras | Option Synchronisation: Direct synchronisation of up to 4 cards [ more...] |
| Option Star-Hub: Synhronisation of up to 16 cards without phase delay [ more...] |
| Option Extra I/O: 24 digital I/O + 4 analog outputs [ more...] |
| Switch inputs between single-ended differential [ mehr...] |
Software Support | Standard drivers for Windows and Linux as well as examples for C/C++, Delphi and Basic are included in the delivery [ more...] |
| Firmware update in the Spectrum Control Center[ more...] |
| SBench: Comfortable measurement software for windows [ more...] |
| SPviewIT: comfortable and fast hard disk streaming software for Windows [ mehr...] |
| Option LabVIEW drivers: Libraries and examples for LabVIEW[ more...] |
| Option DASYLab driver: Direct access to cards with DASYLab [ more...] |
| Option MATLAB driver: Universal driver for all cards [ more...] |
| Option VEE driver: Libraries and examples for Agilent VEE [ more...] |
DownloadsApplication Notes
|
