- 14 bit transient recorder
- 2 synchronous channels with seperate A/D
- Maximum sampling rate 50 MS/s on 2 channels
- High dynamic range
- Up to 256 MSample memory
- 6 input ranges between ±200 mV and ±10 V
- FIFO mode up to 50 MS/s sum samplerate
- Input offset up to ±200%
- Automatic offset calibration
- Synchronisation to multi-board system possible
- 32 Bit CompactPCI 6U interface
- Compatible with 3,3V and 5V PCI I/O-Voltage
MC.40xx FamilyThe MC.40xx is best suitable for applications that need high sampling rates as well as a maximum signal dynamic. These boards offer a resolution 4 times higher than 12 bit boards. On the MC.40xx every channel has its own amplifier and A/D converter. Each input channel could be adapted to a wide variety of signal sources. This is done by software selecting a matching input range, an input impedance and an individual input offset. The user will find easily a matching solution from the six offered models. These versions are working with sampling rates of 20 MS/s or 50 MS/s and have one, two or four channels and could also be updated to a multi-channel system using the internal synchronization bus. Data is written in the internal 8 MSamples up to 256 MSample large memory. This memory could also be used as a FIFO buffer. In FIFO mode data could be transferred on-line directly into the PC RAM or to hard disk. Model | 1 channel | 2 channels | 4 channels | | 20 MS/s | | | | 20 MS/s | 20 MS/s | | | 20 MS/s | 20 MS/s | 20 MS/s | | 50 MS/s | | | | 50 MS/s | 50 MS/s | | | 50 MS/s | 50 MS/s | 50 MS/s |
Block diagram
Memory | FIFO Mode: continous data transfer up to 100 MB/s [ more...] |
| Ringbuffer: Recording with Pre- and Posttrigger [ more...] |
| Standard memory 8 MSamples |
| Option memory upgrade to 16 MS, 32 MS, 64 MS, 128 MS or 256 MS on-board memory |
Trigger | Channel Trigger: Recognition of level and edge [ more...] |
| Window Trigger: Trigger at window enter or leave [ more...] |
| Pulsewidth Trigger: Trigger on defined pulsewidth [ more...] |
| OR Conjunction: Several trigger sources are or'd [ more...] |
| Steepness trigger between two levels [ more...] |
| External Trigger: Input or output of external TTL signal [ more...] |
| Option Multiple Recording: Recording of trigger events with high repetition rates and very small dead time [ more...] |
| Option Gated Sampling: Recording controlled by gate signal [ more...] |
| Option Timestamp: Time stamping of trigger events [ more...] |
Clock | External Clock: Input or output of sampling clock [ more...] |
| Reference Clock: Used to generate sampling clock [ more...] |
Extras | Option Synchronisation: Direct synchronisation of up to 4 cards [ more...] |
| Option Star-Hub: Synhronisation of up to 16 cards without phase delay [ more...] |
| Option Extra I/O: 24 digital I/O + 4 analog outputs [ more...] |
| Option Digital Inputs: Additional 2 synchronous digital inputs per analog channel [ more...] |
Software Support | Standard drivers for Windows and Linux as well as examples for C/C++, Delphi and Basic are included in the delivery [ more...] |
| Firmware update in the Spectrum Control Center[ more...] |
| SBench: Comfortable measurement software for windows [ more...] |
| SPviewIT: comfortable and fast hard disk streaming software for Windows [ mehr...] |
| Option LabVIEW drivers: Libraries and examples for LabVIEW[ more...] |
| Option DASYLab driver: Direct access to cards with DASYLab [ more...] |
| Option MATLAB driver: Universal driver for all cards [ more...] |
| Option VEE driver: Libraries and examples for Agilent VEE [ more...] |
DownloadsApplication Notes
|
