Spectrum-Instrumentation: M2i.6110



	Click picture to enlarge

8 bit arbitrary waveform generator
2 synchronous channels with seperate D/A
Maximum output rate 125 MS/s on 2 channels

32 Bit 66 MHz PCI interface
compatible to 32/64 bit PCI and PCI-X
compatible to 3,3V and 5V PCI I/O voltage
max data transfer 225 MByte/s

Synchronous output on all channels
Fast 8 Bit arbitrary waveform generator
Output level up to ±3 V in 50 Ohm
Amplifier module with ±10 V output level as an option
Offset and amplitude software programmable
32 Bit PCI interface
Compatible with 3,3V and 5V PCI I/O-Voltage
Software SPEasyGenerator included
Up to 4 GSample memory
Synchronisation to multi-board system possible

M2i - new generation of PC instruments

The new M2i card series generation is the successor of the former MI series. The M2i series offers some outstanding features:

	Completely new developed base card
	4 GByte memory with one slot width
	Optimized low jitter clock section
	Multi, Gate, ABA with programmable pre, posttrigger and timestamp
	Zero phase delay synchronization
	AND/OR conjunction of trigger/gate

The MI series of this type is still available for existing customers. Please click here to get detailled information on the card: MI.6110, MI.6111

M2i.61xx Family

The M2i.61xx series offer 2 different versions of arbitrary waveform generators for the PCI bus. With these boards it is possible to generate free definable waveforms on several channels synchronously. There are two or four channels on one board with a synchronous sampling rate of 125 MS/s. The internal standard Syncbus allows the setup of synchronous multi channel systems with higher channel numbers. It is also possible to combine the arbitrary waveform generator with other boards of the M2i product family like analogue or digital acquisition boards.

Data is written in the internal 32 MSample up to 2 GSample large memory. This memory can also be used as a FIFO buffer. In FIFO mode date can be transferred on-line directly into the PC-RAM or to hard disk.