- 14 bit arbitrary waveform generator
- 2 synchronous channels with seperate D/A
- Maximum output rate 125 MS/s on 2 channels
- 32 Bit 66 MHz PCI interface
- compatible to 32/64 bit PCI and PCI-X
- compatible to 3,3V and 5V PCI I/O voltage
- max data transfer 245 MByte/s
- Output up to ±3 V in 50 Ohm
- Amplifier module with ±10 V output level as an option
- Programmable Offset and Amplitude
- Software SPEasyGenerator included
- Up to 4 GSample memory
- Synchronisation to multi-board system possible
- Optional sequence mode with segments, loops, conditions and background loading
M2i - new generation of PC instruments
The new M2i card series generation is the successor of the former MI series. The M2i series offers some outstanding features:
Completely new developed base card
4 GByte memory with one slot width
Optimized low jitter clock section
Multi, Gate, ABA with programmable pre, posttrigger and timestamp
Zero phase delay synchronization
AND/OR conjunction of trigger/gate
The MI series of this type is still available for existing customers. Please click here to get detailled information on the card: MI.6011, MI.6012, MI.6021, MI.6022, MI.6030, MI.6031, MI.6033, MI.6034
The M2i.60xx series offer 8 different versions of arbitrary waveform generators for the PCI bus. With these boards it is possible to generate free definable waveforms on several channels synchronously. There are up to four channels on one board with a maximum sampling rates of 125 MS/s. The internal standard Syncbus allows the setup of synchronous multi channel systems with higher channel numbers. It is also possible to combine the arbitrary waveform generator with other boards of the M2i product family like analogue or digital acquisition boards.
With the up to 2 GSample large on-board memory long waveforms could be generated even with high sampling rates. The memory could also be used as a FIFO buffer to make continuously data transfer from PC memory or hard disk.
FIFO Modus: continuous data transfer up to 245 MB/s (PCI-X) [more...
Singleshot Output: The programmed memory is generated one time
Continous Output: After trigger event the programmed memory is generated continuously in a loop
Option Sequence Mode: chain waveforms, reload, proceed by trigger or software [more...
Standard memory 128 MSamples
Option memory upgrade to 256 MS, 512 MS, 1 GS or 2 GS on-board memory
External Trigger: Input or output of external TTL signal [more...
Option Multiple Replay: Output of several segments with short dead-time [more...
Option Gated Replay: Replay controlled by gate signal [more...
External Clock: Input or output of sampling clock [more...
Reference Clock: Used to generate sampling clock [more...
Option Star-Hub: Synchronisation of up to 16 boards with no phase delay [mehr...
Option BaseXIO: 8 asynchronous digital I/O, 2 extra trigger, Timestamp refclock [more...
Standard drivers for Windows and Linux as well as examples for C/C++, Delphi and Basic are included in the delivery [more...
SBench 5: Comfortable measurement software for windows [more...
Option LabVIEW drivers: Libraries and examples for LabVIEW[more...
Option MATLAB driver: Universal driver for all cards [more...
Option VEE driver: Libraries and examples for Agilent VEE [more...