- 14 bit arbitrary waveform generator
- 4 synchronous channels with seperate D/A
- Maximum output rate 20 MS/s on 4 channels
- PCI Express x1 Interface
- compatible to x1, x4, x8, x16 slots
- 2.5 GBit/s burst transfer rate
- Output up to ±3 V in 50 Ohm
- Amplifier module with ±10 V output level as an option
- Programmable Offset and Amplitude
- Software SPEasyGenerator included
- Up to 4 GSample memory
- Synchronisation to multi-board system possible
M2i - new generation of PC instrumentsThe new M2i card series generation is the successor of the former MI series. The M2i series offers some outstanding features:  | Completely new developed base card
| | 4 GByte memory with one slot width
| | Optimized low jitter clock section
| | Multi, Gate, ABA with programmable pre, posttrigger and timestamp
| | Zero phase delay synchronization
| | AND/OR conjunction of trigger/gate |
The MI series of this type is still available for existing customers. Please click here to get detailled information on the card: MI.6011, MI.6012, MI.6021, MI.6022, MI.6030, MI.6031, MI.6033, MI.6034 
M2i.60xx FamilyThe M2i.60xx series offer 8 different versions of arbitrary waveform generators for the PCI bus. With these boards it is possible to generate free definable waveforms on several channels synchronously. There are up to four channels on one board with a maximum sampling rates of 125 MS/s. The internal standard Syncbus allows the setup of synchronous multi channel systems with higher channel numbers. It is also possible to combine the arbitrary waveform generator with other boards of the M2i product family like analogue or digital acquisition boards.
With the up to 2 GSample large on-board memory long waveforms could be generated even with high sampling rates. The memory could also be used as a FIFO buffer to make continuously data transfer from PC memory or hard disk. PCI/PCI-X | PCI Express | 1 channel | 2 channels | 4 channels | | | 20 MS/s | 20 MS/s | | | | 20 MS/s | 20 MS/s | 20 MS/s | | | 60 MS/s | 60 MS/s | | | | 60 MS/s | 60 MS/s | 60 MS/s | | | 125 MS/s | | | | | 125 MS/s | 125 MS/s | | | | 125 MS/s | 60 MS/s | | | | 125 MS/s | 125 MS/s | 60 MS/s |
Block diagram
Memory | FIFO Modus: continuous data transfer up to 225 MB/s [ more...] |
| Singleshot Output: The programmed memory is generated one time |
| Continous Output: After trigger event the programmed memory is generated continuously in a loop |
| Standard memory 128 MSamples |
| Option memory upgrade to 256 MS, 512 MS, 1 GS or 2 GS on-board memory |
Trigger | External Trigger: Input or output of external TTL signal [ more...] |
| Option Multiple Replay: Output of several segments with short dead-time [ more...] |
| Option Gated Replay: Replay controlled by gate signal [ more...] |
Clock | External Clock: Input or output of sampling clock [ more...] |
| Reference Clock: Used to generate sampling clock [ more...] |
Extras | Option Star-Hub: Synchronisation of up to 16 boards with no phase delay [ mehr...] |
| Option BaseXIO: 8 asynchronous digital I/O, 2 extra trigger, Timestamp refclock [ more...] |
Software Support | Standard drivers for Windows and Linux as well as examples for C/C++, Delphi and Basic are included in the delivery [ more...] |
| SBench: Comfortable measurement software for windows [ more...] |
| Option LabVIEW drivers: Libraries and examples for LabVIEW[ more...] |
| Option DASYLab driver: Direct access to cards with DASYLab [ more...] |
| Option MATLAB driver: Universal driver for all cards [ more...] |
| Option VEE driver: Libraries and examples for Agilent VEE [ more...] |
DownloadsApplication Notes
|
