Spectrum-Instrumentation: M2i.4020 - PCI/PCI-X 1 Channel 14 Bit Transient Recorder



	Click picture to enlarge

14 bit transient recorder
One channel with 20 MS/s
High dynamic range

32 Bit 66 MHz PCI interface
compatible to 32/64 bit PCI and PCI-X
compatible to 3,3V and 5V PCI I/O voltage
max data transfer 225 MByte/s

Up to 2 GSample memory

6 input ranges between ±200 mV and ±10 V

FIFO mode up to 225 MB/s sum samplerate

Input offset up to ±200%

Window/pulse width/re-arm/OR/AND trigger

Automatic offset calibration

Synchronisation to multi-board system possible

32 Bit PCI-X interface, compatible with 32/64 PCI and PCI-X

Compatible with 3,3V and 5V PCI I/O-Voltage

Synchronous digital channels and ABA mode available as an option

M2i - new generation of PC instruments

The new M2i card series generation is the successor of the former MI series. The M2i series offers some outstanding features:

	Completely new developed base card
	4 GByte memory with one slot width
	Optimized low jitter clock section
	Multi, Gate, ABA with programmable pre, posttrigger and timestamp
	Zero phase delay synchronization
	AND/OR conjunction of trigger/gate

The MI series of this type is still available for existing customers. Please click here to get detailled information on the card: MI.4020, MI.4021, MI.4022, MI.4030, MI.4031, MI.4032

M2i.40xx Family

The M2i.40xx series is best suitable for applications that need high sampling rates as well as a maximum signal dynamic. These boards offer a resolution four times higher than 12 bit boards. On the M2i.40xx every channel has its own amplifier and A/D Converter. Each input channel can be adapted to a wide variety of signal sources. This is done by software selecting a matching input range, an input impedance and an individual input offset compensation. The user will easily find a matching solution from the six offered models. These versions are working with sampling rates of 20 MS/s or 50 MS/s and have one, two or four channels. They can also be updated to a multi-channel system using the synchronization option.

Data is written in the internal 32 MSample up to 2 GSample large memory. This memory can also be used as a FIFO buffer. In FIFO mode date can be transferred on-line directly into the PC-RAM or to hard disk.

PCI/PCI-X	PCI Express	1 channel	2 channels	4 channels
M2i.4020	M2i.4020-exp	20 MS/s
M2i.4021	M2i.4021-exp	20 MS/s	20 MS/s
M2i.4022	M2i.4022-exp	20 MS/s	20 MS/s	20 MS/s
M2i.4028	M2i.4028-exp	20 MS/s	Digital
M2i.4030	M2i.4030-exp	50 MS/s
M2i.4031	M2i.4031-exp	50 MS/s	50 MS/s
M2i.4032	M2i.4032-exp	50 MS/s	50 MS/s	50 MS/s
M2i.4038	M2i.4038-exp	50 MS/s	Digital