- 12 bit transient recorder
- 4 synchronous channels with seperate A/D
- Maximum sampling rate 10 MS/s on 4 channels
- Simultanous sampling on all channels
- PCI Express x1 Interface
- compatible to x1, x4, x8, x16 slots
- 2.5 GBit/s burst transfer rate
- Up to 2 GSample memory
- 8 input ranges between ±50 mV and ±10 V
- Input offset up to ±100%
- Window/pulse width/re-arm/OR/AND trigger
- Automatic offset calibration
- Synchronisation to multi-board system possible
- Synchronous digital channels and ABA mode available as an option
M2i - new generation of PC instrumentsThe new M2i card series generation is the successor of the former MI series. The M2i series offers some outstanding features:  | Completely new developed base card
| | 4 GByte memory with one slot width
| | Optimized low jitter clock section
| | Multi, Gate, ABA with programmable pre, posttrigger and timestamp
| | Zero phase delay synchronization
| | AND/OR conjunction of trigger/gate |
The MI series of this type is still available for existing customers. Please click here to get detailled information on the card: MI.3110, MI.3111, MI.3112, MI.3120, MI.3121, MI.3122, MI.3130, MI.3131, MI.3132 
M2i.31xx FamilyThe M2I.31xx series allows recording of two, four or eight channels with sampling rates of 1 MS/s, 10 MS/s or 25 MS/s. Due to the proven design a wide variety of 12 bit A/D converter boards for PCI bus could be offered. These boards are available in several versions and different speed grades making it possible for the user to find an individual solution.
As an option 4 digital inputs per channel could be recorded synchronously. The installed memory of up to 2 GSample will be used for fast data recording. It can completely be used by the currently active channels. If using slower sampling rates the memory is switched to a FIFO buffer and data will be transferred on-line to the PC memory or to hard disk. PCI/PCI-x | PCI Express | 1 channel | 2 channels | 4 channels | 8 channels | | | 1 MS/s | 1 MS/s | | | | | 1 MS/s | 1 MS/s | 1 MS/s | | | | 1 MS/s | 1 MS/s | 1 MS/s | 1 MS/s | | | 10 MS/s | 10 MS/s | | | | | 10 MS/s | 10 MS/s | 10 MS/s | | | | 10 MS/s | 10 MS/s | 10 MS/s | 10 MS/s | | | 25 MS/s | 25 MS/s | | | | | 25 MS/s | 25 MS/s | 25 MS/s | | | | 25 MS/s | 25 MS/s | 25 MS/s | 25 MS/s |
Block diagram
Memory | Ringbuffer: Recording with Pre- and Posttrigger [ more...] |
| FIFO Modus: continuous data transfer up to 225 MB/s [ more...] |
| Standard memory 128 MSamples |
| Option memory upgrade to 256 MS, 512 MS, 1 GS or 2 GS on-board memory |
Trigger | Channel Trigger: Recognition of level and edge [ more...] |
| Window Trigger: Trigger at window enter or leave [ more...] |
| Pulsewidth Trigger: Trigger on defined pulsewidth [ more...] |
| OR/AND Conjunction: Combine several trigger sources with OR and/or AND [ more...] |
| Steepness trigger between two levels [ more...] |
| External Trigger: Input or output of external TTL signal [ more...] |
| Option Multiple Recording: Recording of trigger events with high repetition rates and very small dead time [ more...] |
| Option Gated Sampling: Recording controlled by gate signal [ more...] |
| ABA mode (dual timebase): combination of slow continuous recording with fast acquisitions on trigger [ more...] |
| Option Timestamp: Timestamps for trigger events [ more...] |
Clock | External Clock: Input or output of sampling clock [ more...] |
| Reference Clock: Used to generate sampling clock [ more...] |
Extras | Option Star-Hub: Synchronisation of up to 16 boards with no phase delay [ mehr...] |
| Option BaseXIO: 8 asynchronous digital I/O, 2 extra trigger, Timestamp refclock [ more...] |
| Option Digital Inputs: Additional 4 synchronous digital inputs per analog channel [ more...] |
Software Support | Standard drivers for Windows and Linux as well as examples for C/C++, Delphi and Basic are included in the delivery [ more...] |
| SBench: Comfortable measurement software for windows [ more...] |
| SPviewIT: comfortable and fast hard disk streaming software for Windows [ mehr...] |
| Option LabVIEW drivers: Libraries and examples for LabVIEW[ more...] |
| Option DASYLab driver: Direct access to cards with DASYLab [ more...] |
| Option MATLAB driver: Universal driver for all cards [ more...] |
| Option VEE driver: Libraries and examples for Agilent VEE [ more...] |
DownloadsApplication Notes
|
